Samsung Note 3 Dous N9002 Twrp For Android 5.0 Lollipop

How To Install Twrp Custom Recovery On Samsung Note 3 Duos N9002 Android 5.0 Lollipop

Step 1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer then Skip this Step.

Step 2:  Download twrp-2.8.6.0-hlte-img.tar

Step 3: Now, Switch off your Smartphone.

Step 4: After switching off the phone, you need to boot into Download Mode. To boot into download mode Press and hold Volume Down, Home and Power button at same time for 5-8 seconds until download mode is active.

Step 5: In the Download mode you will be able to see a Warning Yellow Triangle Sign. In this situation, you have to press the Volume Up key to continue.

Step 6: Now, Open Odin3 (found in the extracted files, that you have downloaded in theStep#2) on your computer. Then connect your Smartphone to the computer.

Step 7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show “Added” message at the lower-left panel.

Step 8: Once your device is detected by Odin, click on the PDA button and select the .tar  file (you have downloaded this file in step#2).

Step 9: Now, click on the Start button in Odin to begin the Flashing.

Step 10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Step 11: Once you see, the Pass message in Odin, you can disconnect your Device from the computer.

Step 12: To reboot in recovery power off the phone. press and hold menu+ vol up+ Power button and the same time.