Galaxy S10 Plus SM-G975U1 U2 Firmware [Stock ROM]
If you own a Galaxy S10 Plus SM-G975U1 smartphone and want to upgrade your device’s firmware to the latest version, this guide is for you. The latest firmware version for the Galaxy S10 Plus SM-G975U1 With 2023-01-01 (January 1, 2023) Security Patch Level, and in this article, we will show you how to install it on your device.
Samsung
Benefits of Updating Firmware
Flashing Stock Firmware on Galaxy S10 Plus SM-G975U1.” can resolve issues like your device being stuck on the logo or help in removing the FRP lock.
- Fix boot loop issue
- Update and Downgrade.
- Unroot or fix bugs
- To solve the lag or stutter.
- Fix software issues.
- Revert to stock firmware
Preparation:
- Supported Phone: Galaxy S10 Plus SM-G975U1
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
How To Install Galaxy S10 Plus SM-G975U1 U2 Stock Firmware:
Download Galaxy S10 Plus SM-G975U1 U2 Firmware:
Model | SM-G975U1 U2, S2 Binary 2 |
Region / Country | USA |
Language | Multi-Language |
Android Version | Android 10 (Q) |
PDA | G975U1UES2CSL1 |
CSC | G975U1OYM2CSL1 |
Product code | TMB |
Build Date | Mon, 16 Dec 2019 |
Security Patch Level | 2020-01-01 (1 January 2020) |
Size | 4.7 GB |
Download | Google Drive | Android File Host |
How To Flash Samsung Stock Firmware With ODIN
1: Download the Odin and USB Drivers on your PC. Follow the below link to install the firmware using the Odin Flash tool.
2: Download and extract the Galaxy S10 Plus SM-G975U1 U2 Firmware on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
- Press and hold the Volume Down, Home, and Power buttons simultaneously for 5-8 seconds until download mode is active. For a new phone, use this guide.
5: When Yellow Triangle Sign Appears . Press the Volume Up key to proceed.
6: Launch the Odin flash tool. Next, connect your phone to the pc.
7: Odin will recognize the device and show the “Added” message in the lower left panel.
8: click the PDA button and select the Galaxy S10 Plus SM-G975U1 U2 Firmware.tar file.
9: Click the Start button.
10: Flashing typically takes about 5 minutes to complete.
After the process finishes, you will see a Green Box with Pass in Odin. And phone will then reboot automatically.
To verify the installed firmware, go to Settings → About Phone → Software Information. Check the firmware number under Baseband version.
Troubleshooting:
If issues arise during the firmware update, here are some troubleshooting steps:
- Restart your device and retry the installation process.
- Ensure your device has sufficient battery.
- If you keep facing issues, your device might require a factory reset.