Qnet Passion P3 Firmware File [Stock ROM]

Qnet Passion P3 Firmware

The specific Qnet Passion P3 Firmware comes with a Stock ROM of Qnet Passion P3. This helps you to bypass FRP lock and revert from the root and custom ROM.

How To Flash Qnet Passion P3 Stock ROM:

There are various reasons to flash (Firmware on Qnet Passion P3).

For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it. If you’re going to hard reset your phone and cannot access the recovery menu. But most of the problems and benefits that cause flashing stock ROM are below.

The Benefit Of Qnet Passion P3 Firmware:

  • Flash Stock ROM to unbrick your Qnet Passion P3
  • Update and downgrade
  • Unroot or fix bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert to stock to get your warranty
  • Keeps rebooting issue
  • If your phone boots straight into recovery
  • Phone boots straight into its bootloader

Requirements To Flash Qnet Passion P3 Stock ROM:

  • Charge your mobile: Your phone may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.
  • 1. Take Qnet Passion P3 Full Backup

Before going to install Qnet Passion P3 stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

  • 2. Download Qnet Passion P3 Flash Tool And Drivers:

These drivers are mainly for the devices powered by SPD chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

  • B. We use the Spreadtrum flash tool for as Qnet Passion P3 Flash Tool because of this tool is very efficient and support all kind of SPD phones.

Instructions to Flash Qnet Passion P3 Stock ROM:

1: Download and install SPreadtrum USB Driver on your computer.

2: Download the L5002-F3210-9.0-OP-V030-20191113 flash file.

3: Extract Spreadtrum Upgrade Tool on your computer.

4: Now open Spreadtrum Upgrade Tool .exe.

5: Once SPreadtrum Upgrade Tool is Launched, Connect your device to the computer (Make sure your device is switched off).

6: Once your Smartphone is connected successfully to the computer, click on the Load Packed Button and add the Qnet Passion P3 ROM file. (having .pac extension)

7: Once you have successfully added the. Pac file in SPD Upgrade Tool, click on the Start Downloading button to begin the flashing process.

8: Wait for 2 – 10 minutes, as the device is in the flashing process.

9: During the flashing process, your device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in SPD Upgrade Tool.

10: Close the SPD Tool on your computer and disconnect your Android Smartphone from the computer.

  • Congratulations, You have successfully installed Qnet Passion P3 Stock ROM using SPD Flash tool.

Follow Detailed Instruction To Flash Firmware With SPD Flash Tool.

Disclaimer:

  • Please read and understand the Full Guide before flashing “Qnet Passion P3 Firmware”.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM on Qnet Passion P3 must have a 70–80% charge.

Bin Packet load Error When Flashing “Qnet Passion P3 Stock Firmware File”: If you ever got Bin Packet Error then simply download and try flashing the firmware with this version of SPD Upgrade Tool.

How to Write IMEI After Flashing Qnet Passion P3 Stock Firmware File: After flashing the stock firmware on Spreadtrum Device, you may need to flash the IMEI also, for that use WriteIMEI on Spreadtrum Devices.

Qnet Passion P3 Firmware Details:

Disadvantage

Gapps: Included No Root
Device Supported: Qnet Passion P3 No Twrp And Nand Backup
Tool Supported: SPD Flash Tool No Customization And Over cloaking
Soc: SP7731CEB No ADB Ad Block
Os: Android 6.0 Pre-installed OEM apps

Download Firmware/Flash File
Leave A Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More