The specific Magicsee N5 Plus Firmware comes with a Stock ROM of Magicsee N5 Plus. This helps you to bypass FRP lock and revert from the root and custom ROM.
How To Flash Magicsee N5 Plus Stock ROM:
There are various reasons to flash (Firmware on Magicsee N5 Plus).
For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it. If you’re going to hard reset your phone and cannot access the recovery menu. But most of the problems and benefits that cause flashing stock ROM are below.
Requirements To Flash Magicsee N5 Plus Stock ROM:
- Charge your mobile: Your phone may no less than a half charge.
- Laptop or PC: To execute this installation, you must use a PC or Laptop.
- 1. Take Magicsee N5 Plus Full Backup
Before going to install Magicsee N5 Plus stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.
Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.
- 2. Download Magicsee N5 Plus Flash Tool And Drivers:
- A. Download and install Magicsee N5 Plus Drivers. The necessary communication between your device and PC.
These drivers are mainly for the devices powered by SPD chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.
- B. We use the Spreadtrum flash tool for as Magicsee N5 Plus Flash Tool because of this tool is very efficient and support all kind of SPD phones.
Instructions to Flash Magicsee N5 Plus Stock ROM:
1: Download and install SPreadtrum USB Driver on your computer.
2: Download the N5PLUS-S905X3-20191101 flash file.
3: Extract Spreadtrum Upgrade Tool on your computer.
4: Now open Spreadtrum Upgrade Tool .exe.
5: Once SPreadtrum Upgrade Tool is Launched, Connect your device to the computer (Make sure your device is switched off).
6: Once your Smartphone is connected successfully to the computer, click on the Load Packed Button and add the Magicsee N5 Plus ROM file. (having .pac extension)
7: Once you have successfully added the. Pac file in SPD Upgrade Tool, click on the Start Downloading button to begin the flashing process.
8: Wait for 2 – 10 minutes, as the device is in the flashing process.
9: During the flashing process, your device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in SPD Upgrade Tool.
10: Close the SPD Tool on your computer and disconnect your Android Smartphone from the computer.
- Congratulations, You have successfully installed Magicsee N5 Plus Stock ROM using SPD Flash tool.
Follow Detailed Instruction To Flash Firmware With SPD Flash Tool.
Bin Packet load Error When Flashing “Magicsee N5 Plus Stock Firmware File”: If you ever got Bin Packet Error then simply download and try flashing the firmware with this version of SPD Upgrade Tool.
How to Write IMEI After Flashing Magicsee N5 Plus Stock Firmware File: After flashing the stock firmware on Spreadtrum Device, you may need to flash the IMEI also, for that use WriteIMEI on Spreadtrum Devices.
Magicsee N5 Plus Firmware Details:
|Gapps: Included||No Root|
|Device Supported: Magicsee N5 Plus||No Twrp And Nand Backup|
|Tool Supported: SPD Upgrade Tool||No Customization And Over cloaking|
|Soc: Spreadtrum S905X3||No ADB Ad Block|
|Os: Android 9 Pie||Pre-installed OEM apps|