Gionee P2 Firmware Flash Files [Stock ROM]

If you’re looking for the Gionee P2 Firmware you need to flash, it can sometimes be difficult to locate online. For Gionee P2 Firmware. In this Article/Tutorial about Unbrick Gionee P2 Firmware. and download flash files tested and working file. I have explained the method which is use by People or the Repairing Shops. I hope This Tutorial Will Help You To Unbrick Gionee P2 Firmware Mediatek Based Devices.

Gionee P2 Firmware Flash Files [Stock ROM]

 

The  Gionee P2 is Run on OS Powered by MediaTek Processor, it is a Dual SIM (GSM and GSM) Smartphone/Tablet, Connectivity options include Wi-Fi, GPS, Bluetooth, Infrared, 3G and 4G. Sensors on the phone include the Proximity sensor, Accelerometer, and Ambient light sensor.

If your Gionee P2 device is corrupt or bricked. Download Gionee P2 stock firmware from here. (based on your device model number) and flash it on your smartphone or tablet. To get it back to a working condition again. In this post, we share Gionee P2 official Flash file we test this ROM on many phones it,s work well. To download the official firmware of Gionee P2 and flash with any chines Mobiles flashing tool or box.

Gionee P2 Firmware Flash Files [Stock ROM]:

We will use Sp Flash Tool to flash Gionee P2 Firmware we use for Gionee F100L TV. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Gionee P2.

SP flash tool which is also known as the Smart Phone Flash Tool is a cross-platform application. We use the SP flash tool for Flash custom recovery, flash Stock Rom and to fix the hard brick device. This is a very simple tool SP flash tool is use on Mediatek devices. This allows you to flash stock firmware on Mediatek smartphones and Tablets only. It will not support the devices having chipsets other than MediaTek.

The Benefit Of Gionee P2 Firmware:

  • Flash Stock To Unbrick your Gionee P2
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade Gionee P2
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on Gionee P2
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Gionee P2 Firmware Details:

  • Gapps File: Included
  • Device Supported: Gionee P2
  • Tool Supported: SP Flash Tool
  • Processor: Media-Tek

Download   Gionee P2 Firmware 0301 T5351.zip

Download   Gionee P2 Firmware 0301_T5402.zip

Pre-requirements to Install Firmware on Gionee P2:

  • Supported Phone: Gionee P2
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Phone Backup:

Flashing Tool And Drivers:

Disclaimer:

  • Please Read and understand the Full Guide Before Flashing Gionee P2 Stock ROM.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Firmware on Gionee P2:

Step 1: Extract And Run SP flash tool.

Step 2: Install MTK  android USB drivers.

Step 3: Then download Gionee P2 Firmware for your phone.

Step 4: Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.

Step 5: Now open SP flash tool.exe.

Step 6: When SP flash tool open, go to download button in SP flash tool.

Step 7: In the download tab, click on the scatter load button.

Step 8: After locating the scatter tab, click on the download button.

Step 9: Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)

Step 10: When flashing is completed, a green ring will appear in SP flash tool.

Step 11: Close SP flash tool on your computer and unplug the phone.

Step 12: Power on the phone and enjoy.

Step 13: After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

Follow Detailed Instruction Gionee P2 Firmware Flashing With Sp Flash Tool.

Leave A Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More

Do NOT follow this link or you will be banned from the site!
Please disabled adblocker to keep our website live.After Disabled Click Refresh button
  1. Click on the "ABP" icon in the top-right of your browser
  2. Click on "Enabled on this site" to disable for aiomobilestuff.com

Close