Welcome To all in one thread for Micromax Sliver 5 Q450 in this post I will share all kinds of Micromax Sliver 5 Q450 Firmware With you. Like Ota software update fastboot ROM And QFIL flash tool. So keep in touch and stay updated with your Micromax Sliver 5 Q450 software upgrade.
Why would you want to flash Firmware on your Micromax Sliver 5 Q450?
“Micromax Sliver 5 Q450 Firmware” is the software that is provided by the vendor, or You may say that the software. Which was installed by the manufacturer of the phone is Micromax Sliver 5 Q450 Stock Rom.
The other type of the Rom is Custom Rom which advance users installed after flashing it as per they desire. Flashing a stock Firmware means installing the system image into the device’s internal flash memory.
The Benefit Of Micromax Sliver 5 Q450 Stock Firmware:
- Fix the boot loop problem
- Upgrade and Downgrade
- Unroot or Fix Bugs on your phone
- Fix the lag or stutter on
- Revert to stock to gain your warranty
- Will able to receive OTA Updates
Micromax Sliver 5 Q450 Firmware Details:
- Gapps: Included
- Device Supported: Micromax Sliver 5 Q450
- Tool Supported: QPST Tool – QFIL Qualcomm Flash Image Loader
- Processor: Qualcomm
- Os Ver: Android 5.1 Lollipop
- Micromax Q450 SW V16.0.0 HW V1.0.0 03082015 QFIL.zip
- Micromax Q450 Volte SW V10.0.0 HW V1.0.0 17032016 QFIL.zip
Pre-requirements to Install Micromax Sliver 5 Q450 Stock ROM:
- Supported Phone: Micromax Sliver 5 Q450
- Charge your mobile: You may no less than a half charge.
- Laptop or PC: To execute this installation, you must use a PC or Laptop.
Take Micromax Sliver 5 Q450 Full Backup
Before going to install Micromax Sliver 5 Q450 stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.
Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.
Download Micromax Sliver 5 Q450 Flash Tool And Drivers:
A. Download and install Micromax Sliver 5 Q450 Drivers. The necessary communication between your device and PC.
These drivers are mainly for the devices powered by Qualcomm chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.
B. We use the QFIL QPST Flash Tool for as Micromax Sliver 5 Q450 Flash Tool because of this tool is very efficient and support all kind of Qualcomm phones.
Instructions to Flash Micromax Sliver 5 Q450 Stock ROM:
1. Download and install the driver and tool above. Then launch the QFIL tool.
2. Turn off the phone (Remove the battery if possible, then insert the battery again), hold up the VOLUME KEY and plug in the USB cable to connect to the computer.
3. On the QFIL tool, select the files, in turn, select the files in the ROM folder.
4. After clicking Download, wait for the flash process to finish, the time is about 5-10.
5: During the flashing process, your device will restart automatically.
6. Once flashing is completed, Close the Qfil Tool on your computer and disconnect your Android Smartphone from the computer.
Congratulations, You have successfully installed Stock ROM using QFIL Flash tool.
Follow Detailed Instruction Firmware Flashing With Qfil Flash Tool.
- Please read and understand the Full Guide before flashing “Micromax Sliver 5 Q450 Firmware”.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of information in this guide.
- Before flashing, Stock ROM must have a 70–80% charge.