Galaxy S6 Edge SM-G925F U6 Firmware – G925FXXS6ETI6

Galaxy S6 Edge SM-G925F Binary 6 Firmware

The specific Galaxy S6 Edge SM-G925F U6 Firmware Download Package comes with a Stock ROM of Galaxy S6 Edge SM-G925F U6 Security Patch Level 2018-06-01 (1 June 2018). This helps bypass the FRP lock and revert from the root and custom ROM.

Samsung Galaxy S6 Edge SM-G925F U6 Firmware

There are various reasons to flash “Stock Firmware on Galaxy S6 Edge SM-G925F U6“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

If you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Pre-requirements:

Galaxy S6 Edge SM-G925F U6 Stock ROM Details:

Model SM-G925F Binary 6 U6, S6, Bit 6
Region / Country Portugal
Language Multi-Language
Android version Android 7.0 Nougat
Operator Clean MEO (without logo, operator apps)
PDA G925FXXS6ETI6
CSC G925FMEO6ETJ1
Product code MEO
Build Date Wed, 09 Sep 2020
Security Patch Level 2018-06-01 (1 June 2018)
Size 2.4 GB
[quads id=2]
Download Google Drive Android File Host

Download Galaxy S6 Edge SM-G925F U6 Boot.img

boot.img Galaxy S6 Edge SM-G925F G925FXXS6ETI6 to root on Magisk without TWRP

Download Google Drive

How To Install Galaxy S6 Edge SM-G925F U6 Stock Firmware:

1: Install the Samsung USB Driver on your pc.

2: Download and extract the Galaxy S6 Edge SM-G925F U6 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you can see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.

6: Open Odin. Then, connect your phone to the pc.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message at the lower-left panel.

8: Click the PDA button and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
The flashing process will begin and should take about 10–12 minutes. Your device may take some time to reboot, but don’t be alarmed.

When your Galaxy S6 Edge SM-G925F U6 finally boots up, you should now be running your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy S6 Edge SM-G925F U6 Firmware.
  • Use these instructions at your own risk.
  • Phone must have a 70–80% charge.