Galaxy S20 FE SM-G780G/DS Binary 8 Firmware
Download the latest Galaxy S20 FE SM-G780G/DS Firmware G780GXXS8EXA6 Package, featuring the Security Patch Level from February 1, 2024. This update is essential for bypassing the FRP lock, reverting from root access, and switching back from custom ROMs to the original firmware. Keep your device secure and up-to-date with this crucial download.
Samsung Galaxy S20 FE SM-G780G/DS Binary 8 Android 13 Brazil ZTO G780GXXS8EXA6
SM-G780G/DS U8 Brazil ZTO G780GXXS8EXA6:
Model / Device | SM-G780G/DS Binary 8 U8, S8, Bit 8 |
Region / Country | Brazil |
Language | Multi-Language |
Android Version | Android 13 T |
Operator / Carrier | Clean ZTO (without logo, operator apps) |
AP/PDA | G780GXXS8EXA6 |
CSC | G780GOWO8EXA2 |
Modem CP Version / Baseband | G780GXXS8EXA6 |
Product code | ZTO |
Model References | SM-G780GLVJZTO, SM-G780GLVKZTO, SM-G780GZBJZTO, SM-G780GZBKZTO, SM-G780GZGJZTO, SM-G780GZGKZTO, SM-G780GZWJZTO, SM-G780GZWKZTO |
Build / Release Date | 2024-02-09 |
Security Patch Level | 2024-01-01 (February 1, 2024) |
Size | 6.7GB |
Download | Google Drive |
Downgrade Firmware For SM-G780G/DS:
- Galaxy S20 FE SM-G780G/DS U3 Firmware
- Galaxy S20 FE SM-G780G/DS U4 Firmware
- Galaxy S20 FE SM-G780G/DS U5 Firmware
- Galaxy S20 FE SM-G780G/DS U6 Firmware
- Galaxy S20 FE SM-G780G/DS U7 Firmware
Pre-requirements:
- Compatible Device: Galaxy S20 FE SM-G780G/DS
- Charging: Charge your phone to at least 50%.
- Computer: A PC or laptop is required.
- Phone Backup: Back up your device before starting. Instructions here.
- Samsung USB Driver: Needed for connectivity. Download from Samsung’s site.
- Odin Download: Get the latest version of Odin here for installation.
How To Install Stock Firmware:
- Download the Galaxy S20 FE SM-G780G/DS Binary 8 Firmware files, then extract them on your computer.
- Turn off your smartphone completely.
- To enter Download Mode, simultaneously press and hold the Volume Down, Home, and Power buttons for 5-8 seconds until the screen changes.
- In Download Mode, a warning sign with a yellow triangle will appear. Press the Volume Up button to continue.
- Open Odin on your PC and connect your smartphone via USB.
- Odin will display “Added” in the lower-left corner once the device is successfully connected.
- Select the Firmware.tar file by clicking on the PDA button in Odin.
- Press the Start button in Odin to initiate the firmware flashing process.
- The flashing process should be completed within 30-50 seconds.
To verify the installed firmware, navigate to Settings, select About Phone, then Software Information. Locate the firmware number listed as “Baseband version.”