Galaxy S20 5G SM-G981B U12 Firmware – Android 11 R
The specific Galaxy S20 5G SM-G981B U12 Firmware Download Package comes with a Stock ROM of Galaxy S20 5G SM-G981B U12. This helps you to bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy S20 5G SM-G981B Binary 12 Full Firmware – G981BXXUBDUI5 – XSA – Android 11 R
There are various reasons to flash “Stock Firmware on Galaxy S20 5G SM-G981B U12“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: Galaxy S20 5G SM-G981B U12
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy S20 5G SM-G981B U12 Stock ROM Details:
SM-G981B U12 Full Firmware – G981BXXUBDUI5 – XSA:
Model | SM-G981B U12, Bit 12, Binary 12 |
PDA | G981BXXUBDUI5 |
CSC | G981BOXMBDUI5 |
Operator / Carrier | Clean ZTO (no logo, carrier apps) |
Product code | XSA |
Android version | Android 11 R |
Size | 5.7 GB |
Download | Google Drive |
How To Install Galaxy S20 5G SM-G981B U12 Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer.
2: Download and extract the Galaxy S20 5G SM-G981B U12 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.
6: Open Odin. Then, connect your phone to the pc.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Once Odin detects your device, click on the PDA button and select the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy S20 5G SM-G981B U12 finally boots up, you should now be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy S20 5G SM-G981B U12 Firmware“.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from the use of the information in this guide.
- Phone must have a 70–80% charge.