Galaxy J4+ SM-J415G Binary 6

The specific Galaxy J4+ SM-J415G U6 Firmware Download Package comes with a Stock ROM of Galaxy J4+ SM-J415G U6 Security Patch Level 2020-10-01 (October 1, 2020). This helps you to bypass the FRP lock and revert from the root and custom ROM.

Samsung Galaxy J4+ SM-J415G Binary 6 Android 9 Pie Panama TPA J415GUBS6BVK1

There are various reasons to flash “Stock Firmware on Galaxy J4+ SM-J415G U6“. For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it.

If you’re going to reset your phone hard and you cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Stock ROM:

  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert to stock to get your warranty.

Pre-requirements:

Galaxy J4+ SM-J415G U6 Stock ROM Details:

SM-J415G U6 Panama TPA J415GUBS6BVK1:

Model SM-J415G Binary 6 U6, S6, Bit 6
Region / Country Panama
Language Multi-Language
Android version Android 9 Pie
Operator / Carrier Clear TPA (no logo, carrier apps)
AP / PDA J415GUBS6BVK1
CSC J415GOWO6BUG1
Modem CP Version / Baseband J415GUBU6BUG1
product code TPA
Build Date 2022-11-16
Security Patch Level 2020-12-01 (December 1, 2020)
Size 2.4GB
Advertisements
Download Mega Google Drive
SM-J415G U6Panama TPA – J415GUBS6BTI1:
Model SM-J415G Binary 6 U6, S6, Bit 6
Region / Country Panama
Language Multi-Language
Android version Android 9 Pie
Operator / Carrier Clean TPA (no logo, carrier apps)
PDA J415GUBS6BTI1
CSC J415GOWO6BTF1
product code TPA
Build Date 28 Sep 2020
Security Patch Level 2020-10-01 (October 1, 2020)
Size 2.4 GB
Download Google Drive Android File Host

How To Install Galaxy J4+ SM-J415G U6 Stock Firmware:

Download the Odin and USB Drivers on your PC. Follow the below link to install the firmware using the Odin Flash tool.

How To Flash Samsung Stock Firmware With ODIN

1: Download and Install the Samsung USB Driver on your computer. If a Samsung USB Driver is already installed on your computer, then Skip this Step.

Advertisements

2: Download and extract the [highlight color=”yellow”]Galaxy J4+ SM-J415G U6 Firmware[/highlight] files on your computer.

3: Now, Switch off your Smartphone.

4: After switching off the phone, you must boot into Download Mode. To boot into download mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: You can see a Warning Yellow Triangle Sign in the Download mode. In this situation, you must press the Volume Up key to continue.

6: Now, Download and open Odin. Then, connect your Smartphone to the computer.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message at the lower-left panel.

8: Once Odin detects your device, click the PDA button and select the Firmware.tar file.

Advertisements

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once the Firmware process is completed, you can see a Green Box with a Pass written on it in Odin. During this process, the Smartphone will reboot automatically.

Once you see the Pass message in Odin, you can disconnect your Device from the computer.

The flashing process will begin and should take about 10–12 minutes. Your device may take some time to reboot, but don’t be alarmed.

When your Galaxy J4+ SM-J415G U6 finally boots up, you should be running your desired firmware.

If you want to check that the correct firmware is installed, head to Settings –> About Phone –> Software Information. The firmware number is located under the “Baseband version.”

Disclaimer:

Advertisements
  • Please read and understand the Full Guide before flashing “Galaxy J4+ SM-J415G U6 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from using the information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.

Comments are closed.