MotorolaStock Firmware

Install Moto Edge 40 Pro Firmware Via Fastboot Commands

In this guide, we will show you how to unbrick your Moto Edge 40 Pro using Fastboot commands. Customization has been a significant focus for Motorola devices for quite some time. This applies to the newest addition to the Edge series as well. The sole prerequisite of an unlocked bootloader enables you to flash a variety of GSI ROMs, root the device with Magisk, and install a wide range of modules after installing an unlocked bootloader.

It is important to remember that this is only one side of the coin. In addition to these risks, carrying out these modifications entails some uninvited consequences. There is always a risk of things going south, or, in other words, your device being in a boot loop or soft brick.  Even if that happens, you could easily unbrick your Moto Edge 40 Pro via Fastboot Commands. Here’s how you can do it. Let’s get started.

How to Unbrick Moto Edge 40 Pro via Fastboot Commands

To make it easier to understand, we have divided the instructions below into separate sections. Follow the same sequence as mentioned. In the event of a thermonuclear war, if you don’t wake up in the morning, or if anything happens to your device and data, AMS and its members will not be held liable.

1: Install Android SDK

Your first step should be to install the Android SDK Platform Tools on your PC. There is only one official ADB and Fastboot binary provided by Google, and it is the only one that is recommended. To use it, download the file and extract it to a convenient location on your computer. You will then have access to the platform tools folder, which you will use throughout the guide.

Entering Commands in PowerShell Window

2: Download Moto Edge 40 Pro [EU] Firmware

Get the stock firmware for your device from a trusted site [such as Lolinet]. You will need to extract it to the platform tools folder on your computer once it has been downloaded.

Download Moto Edge 40 Pro [EU] Firmware

3: Boot Moto Edge 40 Pro to Fastboot Mode

Most soft-bricked or boot-looped devices are already in Fastboot Mode when they are soft-bricked or boot-looped. In case you get stuck in a boot loop, press and hold the Power button for several seconds. Press and hold the Power and Volume Down keys (or the Power and Volume Up keys) together to boot into Fastboot mode.

Boot Moto Edge 40 Pro to Fastboot Mode

Nevertheless, if you cannot power off the device, allow its battery to drain. Once that has happened, connect the charger to the device. Use the Power and Volume Up/Down keys when it is about to boot up and it will immediately boot to Fastboot Mode.

4: Unbrick Moto Edge 40 Pro via Fastboot

  • The next step is to enter the following commands in the CMD window that is opened in the platform tools folder. Don’t run more than one command at a time.

  • In addition, if you receive an error while executing that command, you should skip it and move on to the next one instead of stopping the process in the middle.

fastboot flash gpt gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash vbmeta.img vbmeta.img
fastboot flash vbmeta_system.img vbmeta_system.img
fastboot flash radio.img radio.img
fastboot flash BTFM.bin BTFM.bin
fastboot flash dspso.bin dspso.bin
fastboot flash logo.bin logo.bin
fastboot flash boot.img boot.img
fastboot flash init_boot.img init_boot.img
fastboot flash vendor_boot.img vendor_boot.img
fastboot flash dtbo.img dtbo.img
fastboot flash recovery.img recovery.img
fastboot flash super.img_sparsechunk.0
fastboot flash super.img_sparsechunk.1
fastboot flash super.img_sparsechunk.2
fastboot flash super.img_sparsechunk.3
fastboot flash super.img_sparsechunk.4
fastboot flash super.img_sparsechunk.5
fastboot flash super.img_sparsechunk.6
fastboot flash super.img_sparsechunk.7
fastboot flash super.img_sparsechunk.8
fastboot flash super.img_sparsechunk.9
fastboot flash super.img_sparsechunk.10
fastboot flash super.img_sparsechunk.11
fastboot erase partition apdp
fastboot erase partition apdpb
fastboot erase partition carrier
fastboot erase partition userdata
fastboot erase partition metadata
fastboot erase partition ddr
fastboot oem fb_mode_clear
  • The final step is to boot your device to the OS by typing the following command:
fastboot reboot

There you have it. Here are the steps you need to follow to unbrick your Moto Edge 40 Pro using Fastboot commands. Do let us know in the comments if you have any questions about the aforementioned steps. We will get back to you as soon as possible with a solution.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button