Whether you’re a beginner or a seasoned tech enthusiast, our step-by-step instructions will walk you through the process of flashing the firmware on your Cubot Note 21 with ease. By following our guide, you can ensure that your device is running smoothly and efficiently, allowing you to enjoy all of its features to the fullest. Don’t hesitate to reach out to us if you have any questions or need further assistance; we’re here to help you make the most of your Cubot Note 21 experience.
Firmware Information:
| Device Name: | Cubot Note 21 |
| ROM Type: | Full ROM |
| SoC: | unisoc |
| OS: | Android 13 |
| Password: | Null |
| Root Access: | No |
| Firmware Version: | check below list |
Available Firmware
Requirements:
- Charge your mobile:
- full backup.
- Cubot Note 21 Drivers.
- Spreadtrum flash tool
Instructions for the Flash Cubot Note 21 Stock Rom:
1: Download and install the SPreadtrum USB Driver on your computer.
2: Download the Cubot Note 21 flash file.
3: Extract the Spreadtrum Upgrade Tool on your computer.
4: Now open Spreadtrum Upgrade Tool .exe.
5: Once the Spreadtrum Upgrade Tool is launched, connect your device to the computer (make sure your device is switched off).
6: Once your smartphone is successfully connected to the computer, click on the Load Packed Button and add the Cubot Note 21 ROM file. (having .pac extension)
7: Once you have successfully added the. Pac file in SPD Upgrade Tool, click on the Start Downloading button to begin the flashing process.
8: Wait for 2 – 10 minutes, as the device is in the flashing process.
9: During the flashing process, your device will restart automatically. Once flashing is completed, you can see the green-passed message in the SPD Upgrade Tool.
10: Close the SPD Tool on your computer and disconnect your Android Smartphone from the computer.
Congratulations! You have successfully installed the Cubot Note 21 Stock ROM using the SPD Flash tool.
