If you own a Galaxy A05 SM-A055M/DS smartphone and are looking to upgrade your device’s firmware to the A055MUBU1AWH4 version, this guide is for you. The latest firmware version for the Galaxy A05 SM-A055M/DS U1 is 2023-09-01 (September 1, 2023) Security Patch Level, and in this article, we will show you how to install it on your device.
Samsung Galaxy A05 SM-A055M/DS Binary 1 Android 13 Brazil ZTO A055MUBU1AWH4
Download Galaxy A05 SM-A055M/DS U1 Latest Firmware:
SM-A055M/DS U1 Brazil ZTO A055MUBU1AWH4:
Model | SM-A055M Binary 1: U1, S1, Bit 1 |
Region / Country | Brazil |
Language | Multi-Language |
Android Version | Android 13 T |
Operator, Operator / Carrier | Clean ZTO (without logo or operator apps) |
AP/PDA | A055MUBU1AWH4 |
CSC | A055MOWO1AWI1 |
Modem CP Version / Baseband | A055MUBU1AWH4 |
Product code | ZTO |
Model References | at |
Build / Release Date | 2023-10-30 |
Security Patch Level | 2023-09-01 (September 1, 2023) |
Size | 4.8GB |
Download | Google Drive |
Preparation:
- Supported Phone: Galaxy A05 SM-A055M/DS
- Charge your mobile: You may charge no less than a half charge.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
How To Install Galaxy A05 SM-A055M/DS U1 Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer. If a Samsung USB Driver is already installed on your computer, then Skip this Step.
2: Download and extract the Galaxy A05 SM-A055M/DS U1 Firmware files on your computer.
3: Now, switch off your smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.
6: Now, download and open Odin. Then connect your smartphone to the computer.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button and choose the Firmware.tar file.
9: Click the Start button in Odin to begin the flashing.
10: Flashing usually takes 30–50 seconds to complete the process on your phone.
Once you see the Pass message in Odin, you can disconnect your device from the PC.
The flashing process will begin and should take about 10–12 minutes. Your device may take some time to reboot but don’t be alarmed.
When your Galaxy A05 SM-A055M/DS U1 finally boots up, you should be running your desired firmware.
To verify the installed firmware, go to Settings > About Phone > Software Information. Check the firmware number under “Baseband version.”