If you own a Galaxy A12 SM-A127F smartphone and want to upgrade your device’s firmware to the A127FXXUADWI2 version, this guide is for you. The latest firmware version for the Galaxy A12 SM-A127F U10 is 2023-08-01 (August 1, 2023) Security Patch Level, and in this article, we will show you how to install it on your device.
Samsung Galaxy A12 SM-A127F Binary 10 Android 13 Portugal MEO A127FXXUADWI2
Download Galaxy A12 SM-A127F U10 Latest Firmware:
SM-A127F U10 Portugal MEO A127FXXUADWI2:
Model | SM-A127F Binary 10: U10, S10, Bit 10 |
Region / Country | Portugal |
Language | Multi-Language |
Android Version | Android 13 T |
Operator / Carrier | Clean MEO (without logos and operator apps) |
AP/PDA | A127FXXUADWI2 |
CSC | A127FOXMADWI2 |
Modem CP Version / Baseband | A127FXXUADWI2 |
Product code | MEO |
Build / Release Date | 2023-10-31 |
Security Patch Level | 2023-08-01 (August 1, 2023) |
Size | 5.3GB |
Download | Google Drive |
Preparation:
- Supported Phone: Galaxy A12 SM-A127F
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
How To Install Galaxy A12 SM-A127F U10 Stock Firmware:
1: Install the Samsung USB Driver on your PC.
2: Download and extract the Galaxy A12 SM-A127F U10 Firmware files on your computer.
3: Now, switch off your smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.
6: Open Odin. Then, connect your phone to the PC.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the flashing.
10: Flashing usually takes 30–50 seconds to complete on your phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy A12 SM-A127F U10 finally boots up, you should run your desired firmware.
To verify the installed firmware, go to Settings > About Phone > Software Information. Check the firmware number under “Baseband version.”