If you own a Galaxy A30s SM-A307G smartphone and are looking to upgrade your device’s firmware to the latest version, we’ll show you how to do so in this guide. The latest firmware version for the Galaxy A30s SM-A307G U6 With 2023-08-01 (August 1, 2023) Security Patch Level is available and in this article, we will show you how to install it on your device.
Samsung Galaxy A30s SM-A307G Binary 6 Android 11 Mexico MXO A307GUBS6CWH2
Benefits of Updating Firmware
There are various reasons to flash “Stock Firmware on Galaxy A30s SM-A307G U6“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Return to stock for warranty coverage.
Preparation:
- Supported Phone: Galaxy A30s SM-A307G U6
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
How To Install Galaxy A30s SM-A307G U6 Stock Firmware:
Download Galaxy A30s SM-A307G U6 Latest Firmware:
SM-A307G U6 Mexico MXO A307GUBS6CWH2:
| Model | SM-A307G Binary 6 U6, S6, Bit 6 |
| Region / Country | Mexico |
| Language | Multi-Language |
| Android OS Version | Android 11 R |
| Operator / Carrier | Cleans MXO (no logo, carrier apps) |
| AP / PDA | A307GUBS6CWH2 |
| CSC | A307GOWO6CWH1 |
| Modem CP Version / Baseband | A307GDXS6CWH2 |
| Product code | MXO |
| Build / Release Date | 2023-08-31 |
| Security Patch Level | 2023-08-01 (August 1, 2023) |
| Size | 4GB |
| Download | Google Drive |
1: Download and Install the Samsung USB Driver on your computer.
2: Download and extract the Galaxy A30s SM-A307G U6 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button, and choose the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
When your Galaxy A30s SM-A307G U6 finally boots up, you should be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Troubleshooting
If you encounter any problems during the firmware update process, here are a few things you can try:
- Restart your device and retry the installation process.
- Ensure your device has sufficient battery.
- If you continue to encounter problems, you may need to perform a factory reset on your device.
Conclusion
Installing the latest firmware on your Galaxy A30s SM-A307G U6 can bring several improvements to your device, including bug fixes and new features. By following the steps in this guide, you can update your device to the latest firmware successfully.