If you own a Galaxy M34 5G SM-M346B/DS U2 smartphone and are looking to upgrade your device’s firmware to the latest version, this guide is for you. The latest firmware version for the Galaxy M34 5G SM-M346B/DS U2 With 2023-11-01 (November 1, 2023)
Security Patch Level, and in this article, we will show you how to install it on your device.
Samsung Galaxy M34 5G SM-M346B/DS Binary 2 Android 14 Brazil ZTO M346BXXU2BWL1
Benefits of Updating Firmware
There are various reasons to flash “Stock Firmware on Galaxy M34 5G SM-M346B/DS U2“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Preparation:
- Supported Phone: Galaxy M34 5G SM-M346B/DS U2
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
How To Install Galaxy M34 5G SM-M346B/DS U2 Stock Firmware:
Download Galaxy M34 5G SM-M346B/DS U2 Latest Firmware:
SM-M346B/DS U2 Brazil ZTO M346BXXU2BWL1:
Model | SM-M346B Binary 2 U2, S2, Bit 2 |
Region / Country | Brazil |
Language | Multi-Language |
Android Version | Android 14 One UI 6 |
Operator / Carrier | Clean ZTO (without logo, operator apps) |
AP/PDA | M346BXXU2BWL1 |
CSC | M346BOWO2BWL1 |
Modem CP Version / Baseband | M346BXXU2BWL1 |
Product code | ZTO |
Model References | SM-M346BDBDZTO, SM-M346BZBDZTO, SM-M346BZSDZTO |
Build / Release Date | 2023-12-26 |
Security Patch Level | 2023-11-01 (November 1, 2023) |
Size | 6.6GB |
Download | Google Drive |
1: Download and Install the Samsung USB Driver on your computer.
2: Download and extract the Galaxy M34 5G SM-M346B/DS U2 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button, and choose the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
When your Galaxy M34 5G SM-M346B/DS U2 finally boots up, you should be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Troubleshooting
If you encounter any problems during the firmware update process, here are a few things you can try:
- Restart your device and retry the installation process.
- Ensure your device has sufficient battery.
- If you continue to encounter problems, you may need to perform a factory reset on your device.
Conclusion
Installing the latest firmware on your Galaxy M34 5G SM-M346B/DS U2 can bring several improvements to your device, including bug fixes and new features. By following the steps in this guide, you can update your device to the latest firmware successfully.