Mobiistar XQ Dual Firmware

Here are the most suitable ways of executing how to Flash Mobiistar XQ Dual Firmware. If you are using a Mobiistar XQ Dual this will be the best guide to install Mobiistar XQ Dual Stock ROM.

By flashing the Mobiistar XQ Dual, almost all the data, components, and files present there will get wiped off, and installs a fresh OS version.

Stock Rom is an operating system set as default in your Android phones. These are developed by the manufacturers to attracts their customers. Every device contains its own unique and attractive features in its Stock Rom.

- Advertisement -

Mobiistar XQ Dual Stock ROM – How To Flash Guide

The Advantages Of Mobiistar XQ Dual Stock ROM:

A Soft Brick or a Software Brick, is usually just when you’re Phone is stuck in a boot loop, and as the name implies, is caused by a software error. Usually the lack of a system to boot from or some other minor software bug that glitching boot.

If your Mobiistar XQ Dual device turns to a soft-brick, it may:

  • Keeps Rebooting;
  • Boots Straight Into Recovery;
  • Boots Straight Into its Bootloader;
  • Freeze at the startup screen or boot Animation;

Pre-requirements:

Mobiistar XQ Dual Firmware Details:

Gapps: Included
Device Supported: 
Mobiistar XQ Dual
Tool Supported: 
QcomDloader Tool
Soc: 
QCOM
Os: 
Android 7 Nougat
Password: Null
[quads id=5]
Download Firmware/Flash File

Instructions to Install Mobiistar XQ Dual Firmware:

Download the QcomDloader Tool and USB Drivers on your PC. Follow the below Guide to install the firmware using the QcomDloader Tool.

Guide to Install Stock ROM using QcomDloader Tool

  1. Download and extract the QcomDloader Tool on the computer.
  2. Download Stock Firmware.
  3. Install Mobiistar XQ Dual USB Driver on the Computer.
  4. Connect your device to the computer using a USB cable.
  5. Once your device is connected to the computer, Open QcomDloader.exe.
  6. Click on the Load Button and locate the “Mobiistar XQ Dual Firmware” on the computer.
  7. Click on the Settings Button and Select Download Mode as Upgrade.
  8. Now, Leave the eMMC Programmer, Raw program, Patch0 Box as it is. But, you may need to change it, if the name of a respected file is not the same as written in the Box.
  9. Click OK to exit the configuration interface.
  10. Click on Start Button to begin the Flashing process.
  11. Once, Flashing is completed you will be able to see the Green Passed Message.
  12. Disconnect the device from the Computer and Close the QcomDloader Tool.
  13. Congratulations! Now Restart your Mode device, and you will be able to use it.

Follow Detailed Guidelines How To Flash Stock ROM With QcomDloader Tool

Disclaimer:

  • Please read and understand the Full Guide Before Flashing.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Ensure charged you phone at 70–80%.