Downloads

Galaxy S23 SM-S911B/DS U2 Firmware – S911BXXU2AWF1

If you own a Galaxy S23 SM-S911B/DS  smartphone and want to upgrade to the latest S911BXXU2AWF1 firmware, you’ve come to the right place. This comprehensive guide will walk you through the steps to install the newest firmware version, which includes the 2023-06-01 (June 1, 2023) Security Patch Level. Keeping your Galaxy S23 updated ensures optimal performance and security. Follow our easy instructions to enhance your device today!.

Samsung Galaxy S23 SM-S911B/DS Binary 2 Android 13 Brazil ZTO S911BXXU2AWF1

SM-S911B/DS u2 Brazil ZTO S911BXXU2AWF1:

Model

SM-S911B/DS Binary 2 U2, S2, Bit 2

Advertisements

Region / Country

Brazil

Language

Multi-Language

Advertisements

Android version

Android 13 T

Operator/ Carrier

Clean ZTO (no logo, carrier apps)

Advertisements

AP / PDA

S911BXXU2AWF1

CSC

S911BOWO2AWF1

Advertisements

Modem CP Version / Baseband

S911BXXU2AWF1

product code

ZTO

Advertisements

Model References

SM-S911BLGJZTO, SM-S911BLGKZTO, SM-S911BZAJZTO

Build Date

2023-06-09

Advertisements

Security Patch Level

2023-06-01 (June 1, 2023)

Size

7.3 GB

Advertisements

Advertisements

Download

Google Drive

Preparation:

    • Supported Device: Galaxy S23 SM-S911B/DS U2
    • Charge Your Phone: Ensure at least 50% battery life.
    • Required Hardware: A laptop or PC.
    • Backup:Backup Your Android Phone

How to Install Stock Firmware on Galaxy S23 SM-S911B/DS:

  1. Begin by downloading and installing the Samsung USB Driver on your computer. If you already have the Samsung USB Driver installed, you can skip this step.
  2. Next, download and extract the Galaxy S23 SM-S911B/DS S911BXXU2AWF1 Firmware files onto your computer.
  3. Now, power off your smartphone.
  4. Enter Download Mode:

> Press and hold the Volume Down, Home, and Power buttons simultaneously for 5-8 seconds until Download Mode activates.

Advertisements
  1. In Download Mode, you will see a warning yellow triangle. Press the Volume Up key to continue.
  2. Now, download and open Odin, then connect your smartphone to the computer.
  3. Odin should detect your device and display the “Added” message in the lower-left panel.
  4. Click the PDA button, and select the Firmware.tar file.
  5. Click the Start button in Odin to initiate the flashing process.
  6. Flashing typically takes 30-50 seconds to complete. Once you see the “Pass” message in Odin, you can disconnect your device from the PC. The entire flashing procedure should take around 10–12 minutes. Your device may take a moment to reboot, so don’t worry.

When your Galaxy S23 SM-S911B/DS finally boots up, it should be running the firmware you intended to install. To verify the installed firmware, navigate to Settings → About Phone → Software Information, and check the firmware number under “Baseband version.”

Troubleshooting

If you encounter any issues during the firmware update process, consider these troubleshooting steps:

  1. Restart your device and attempt the installation again.
  2. Ensure your device has sufficient battery life.
  3. If problems persist, you may need to perform a factory reset on your device.

Conclusion

Updating the S911BXXU2AWF1 firmware on your Galaxy S23 SM-S911B/DS can enhance your device with numerous improvements, including bug fixes and new features. By following the steps outlined in this guide, you can successfully update your device to the latest firmware.

Leave a Reply

Your email address will not be published. Required fields are marked *