Galaxy S23+ SM-S916B/DS U2 Firmware – S916BXXU2AWF1

If you own a Galaxy S23+ SM-S916B/DS smartphone and want to upgrade to the latest S916BXXU2AWF1 firmware, this guide is tailored for you. The most recent firmware version for the Galaxy S23+ SM-S916B/DS includes the U2 update with a Security Patch Level dated June 1, 2023. In this article, we’ll walk you through the installation process for this update on your device.

Samsung Galaxy S23+ SM-S916B/DS Binary 2 Android 13 Brazil ZTO S916BXXU2AWF1

SM-S916B/DS U2 Brazil ZTO S916BXXU2AWF1:

Model	SM-S916B/DS Binary 2 U2, S2, Bit 2 Advertisements
Region / Country	Brazil
Language	Multi-Language Advertisements
Android version	Android 13 T
Operator / Carrier	Clean ZTO (no logo, carrier apps) Advertisements
AP / PDA	S916BXXU2AWF1
CSC	S916BOWO2AWF1 Advertisements
Modem CP Version / Baseband	S916BXXU2AWF1
product code	ZTO Advertisements
Model References	SM-S916BZEJZTO, SM-S916BLIKZTO, SM-S916BLIJZTO
Build Date	2023-06-09 Advertisements
Security Patch Level	2023-06-01 (June 1, 2023)
Size	8.5 GB Advertisements

Download

Google Drive

Benefits of Updating Firmware

• Fix boot loop issue
• Update and Downgrade
• Unroot or Fix Bugs
• To solve the lag or stutter
• Fix software issues.
• Return to stock for warranty coverage.

Preparation:

• Supported Phone: Galaxy S23+ SM-S916B/DS
• Charge your mobile: You may no less than a half charge.
• Laptop or PC.
• Backup Android Phone
• Download and install Samsung USB Driver
• Download Odin’s Latest version

How To Install Galaxy S23+ SM-S916B/DS U2 Stock Firmware:

1. Download and Install the Samsung USB Driver

Begin by downloading and installing the Samsung USB Driver on your computer. If it is already installed, you can skip this step.

2. Download and Extract the Firmware Files

Next, download and extract the Galaxy S23+ SM-S916B/DS S916BXXU2AWF1 Firmware files onto your computer.

3. Power Off Your Smartphone

Turn off your smartphone to prepare for the next steps.

4. Boot into Download Mode

To enter Download Mode, simultaneously press and hold the Volume Down, Home, and Power buttons for 5-8 seconds until you see the Download Mode screen.

5. Acknowledge the Warning

In Download Mode, a Warning Yellow Triangle sign will appear. Press the Volume Up key to proceed.

6. Download and Open Odin

Download Odin and open it. Connect your smartphone to your computer.

7. Device Detection

Odin should detect your device and display an “Added” message in the lower-left panel.

8. Select the Firmware File

Click the PDA button and choose the Firmware.tar file you downloaded earlier.

9. Start the Flashing Process

Click the Start button in Odin to initiate the flashing process.

10. Completion of Flashing

The flashing process typically takes 30-50 seconds. Once you see the “Pass” message in Odin, you may safely disconnect your device from the computer.

After your Galaxy S23+ SM-S916B/DS boots up, it should be running the latest firmware. To verify the installation, navigate to Settings → About Phone → Software Information and check the firmware number under “Baseband version.”

Troubleshooting Tips

If you experience any issues during the firmware update process, consider the following steps:

1. Restart your device and attempt the installation again.
2. Ensure that your device has sufficient battery life.
3. If problems persist, a factory reset may be necessary.

Conclusion

Updating the firmware on your Galaxy S23+ SM-S916B/DS S916BXXU2AWF1 can enhance your device’s performance by addressing bugs and introducing new features. By following this guide, you can successfully upgrade to the latest firmware.