Home Stock Firmware Galaxy S10 SM-G973F U9 Combination File – G973FXXU9ATJ1

Galaxy S10 SM-G973F U9 Combination File – G973FXXU9ATJ1

Galaxy S10 SM-G973F Binary 9 Combination File

A Galaxy S10 SM-G973F U9 Combination File is a test mode that does not have the effect of fixing the hardware but only the test function of the operation or damage.

However, a Combination file can recover IMEI, Baseband, or some software errors, but not all. By using a combination file, you will lose all features, including calls, play games, web history, and pictures. Etc.

S10 SM-G973F Binary 9 Combination File Android 9 Pie Binary 9 G973FXXU9ATJ1

Samsung combination firmware (Samsung factory binary) and Samsung official firmware are being provided in similar file names with little difference. Samsung combination firmware is being provided for repair purposes at Samsung service and Samsung official firmware for everyday usage for Smartphone users.

The Advantages Of Combination File:

  • The technician or the developer can thoroughly read and test the device’s equipment which is considered the service menu.
  • Downgrade Your device, and install software system Android version older than the current version.
  • Unlock the device protection with the Google Account Google FRP.
  • Fix the Root device key-DRK problem.
  • Fix the problems of stopping the Samsung device in the Recovery Mode.
  • Fix the problems of stopping Samsung devices in the Samsung logo.
  • Fixed problems with the IMEI serial number.

Prerequisites:

  • Supported Phone: Galaxy S10 SM-G973F U9
  • Charge your mobile: You may charge no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.
  • Backup Android Phone
  • Download Odin Latest
  • Download and install the Samsung USB Driver

Galaxy S10 SM-G973F U9 Combination Firmware Details:

Model SM-G973F
Language Multi-Language
Android version Android 9 Pie
PDA G973FXXU9ATJ1
Date October / 2020
Revision 1
Size 1.9 GB

Combination File S10 SM-G973F U9 Binary 9 Bit 9
COMBINATION_FAC_FA90_G973FXXU9ATJ1_FAC_CL19880497_QB34889589_REV01

Advertisements
Download Google Drive AHF

How To Install Galaxy S10 SM-G973F U9 Combination File:

Download the Odin and Samsung USB Driver on your PC. Follow the below link to install the firmware using the Odin Flash tool.

How To Flash Samsung Combination File

1: Download and Install the Samsung USB Driver on your computer. If a Samsung USB Driver is already installed on your computer, then Skip this Step.

Advertisements

2: Download and extract the [highlight color=”yellow”]Galaxy S10 SM-G973F U9 Combination File[/highlight] files on your computer.

3: Now, Switch off your Smartphone.

4: After switching off the phone, you must boot into Download Mode. To boot into download mode.

Press and hold the Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: You can see a Warning Yellow Triangle Sign in the Download mode. In this situation, you must press the Volume Up key to continue.

6: Now, Download and open Odin. Then, connect your Smartphone to the computer.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message at the lower-left panel.

8: Once Odin detects your device, click the PDA button and select the Galaxy S10 SM-G973F U9 Combination File.tar file.

Advertisements

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once the Combination File process is completed, you will see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.

Once you see the Pass message in Odin, you can disconnect your Device from the computer.

Disclaimer:

  • Please read and understand the Full Guide before flashing “Galaxy S10 SM-G973F U9 Combination File.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from using the information in this guide.
  • Before flashing, the Combination File on Galaxy S10 SM-G973F U9 must have a 70–80% charge.