Galaxy A72 SM-A725M/DS U6 Firmware – Android 13 T

If you own a Galaxy A72 SM-A725M/DS smartphone and want to upgrade your device’s firmware to the latest version, this guide is for you. The latest firmware version for the Galaxy A72 SM-A725M/DS With 2023-10-01 (October 1, 2023) Security Patch Level, and in this article, we will show you how to install it on your device.

Samsung Galaxy A72 SM-A725M/DS Binary 6 Android 13 Brazil ZTO A725MUBU6DWJ1

Benefits of Updating Firmware

There are various reasons to flash “Stock Firmware on Galaxy A72 SM-A725M/DS U6“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

• Fix boot loop issue
• Update and Downgrade
• Unroot or Fix Bugs
• To solve the lag or stutter
• Fix software issues.
• Return to stock for warranty coverage.

Preparation:

• Supported Phone: Galaxy A72 SM-A725M/DS
• Charge your mobile: You may no less than a half charge.
• Laptop or PC.
• Backup Android Phone
• Download and install the Samsung USB Driver
• Download Odin’s Latest version

How To Install Galaxy A72 SM-A725M/DS U6 Stock Firmware:

Download Galaxy A72 SM-A725M/DS U6 Latest Firmware:

SM-A725M/DS U6 Brazil ZTO A725MUBU6DWJ1:

1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.

2: Download and extract the [su_highlight background=”#fffe99″]Galaxy A72 SM-A725M/DS U6 Firmware [/su_highlight]files on your computer.

3: Now, Switch off your Smartphone.

4: Boot into Download Mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Click the PDA button, and choose the Firmware.tar file.

9: Click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once you see the Pass message in Odin, you can disconnect your device from the pc.
The flashing process will begin and should take about 10–12 minutes. Your device may take some time to reboot, but don’t be alarmed.

When your Galaxy A72 SM-A725M/DS U6 finally boots up, you should be running your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”