Galaxy A14 SM-A145R U2 Firmware – A145RXXU2AWG3
If you own a Galaxy A14 SM-A145R smartphone and want to upgrade the firmware to the latest A145RXXU2AWG3 version, this guide is for you. The latest firmware version for the Galaxy A14 SM-A145R includes the 7/1/2023 Security Patch Level. In this article, we will show you how to install the firmware on your device.
Samsung Galaxy A14 SM-A145R Binary 2 Android 13 Portugal MEO A145RXXU2AWG3
SM-A145R U2 Portugal MEO A145RXXU2AWG3:
| Model | SM-A145R Binary 2 U2, S2, Bit 2 |
| Region / Country | Portugal |
| Language | Multi-Language |
| Android Version | Android 13 T |
| Operator / Carrier | Clean MEO (no logo, carrier apps) |
| AP / PDA | A145RXXU2AWG3 |
| CSC | A145ROXM2AWG3 |
| Modem CP Version / Baseband | A145RXXU2AWF2 |
| Product code | MEO |
| Build / Release Date | 08/06/2023 |
| Security Patch Level | 7/1/2023 (July 1, 2023) |
| Size | 5.3GB |
| Download | Google Drive |
Preparation:
- Supported Phone: Galaxy A14 SM-A145R.
- Charge your mobile: You may no less than a half charge.
- Laptop or PC: To execute this installation, you must use a PC or Laptop.
- Backup Android Phone
- Download and install Samsung USB Driver
- Download Odin’s Latest version
How To Install Galaxy A14 SM-A145R U2 Stock Firmware:
Download the Odin and USB Drivers on your PC. Follow the below link to install the firmware using the Odin Flash tool.
1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.
2: Download and extract the [su_highlight background=”#fffe99″]Galaxy A14 SM-A145R Firmware [/su_highlight]files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button, and choose the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
When your Galaxy A14 SM-A145R finally boots up, you should be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”