Uncategorized

Galaxy Tab S9 Ultra (Wi-Fi) SM-X910 U1 Firmware – Android 13 T

Galaxy Tab S9 Ultra (Wi-Fi) SM-X910 U1 Firmware
If you own a Galaxy Tab S9 Ultra (Wi-Fi) SM-X910 U1 smartphone and want to upgrade your device’s firmware to the latest version, this guide is for you. The latest firmware version for the Galaxy Tab S9 Ultra (Wi-Fi) SM-X910 U1 With 2023-08-01 (August 1, 2023)
Security Patch Level: in this article, we will show you how to install it on your device.

Samsung Galaxy Tab S9 Ultra (Wi-Fi) SM-X910 Binary 1 Android 13 Brazil ZTO X910XXU1AWHA

Benefits of Updating Firmware

There are various reasons to flash “Stock Firmware on Galaxy Tab S9 Ultra (Wi-Fi) SM-X910 U1“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Return to stock for warranty coverage.

Preparation:

How To Install Galaxy Tab S9 Ultra (Wi-Fi) SM-X910 U1 Stock Firmware:

Download Galaxy Tab S9 Ultra (Wi-Fi) SM-X910 U1 Latest Firmware:

SM-X910 U1 Brazil ZTO X910XXU1AWHA:

Model SM-X910 Binary 1 U1, S1, Bit 1
Region / Country Brazil
Language Multi-Language
Android Version Android 13 T
Operator / Operator / Carrier Clean ZTO (without logo, operator apps)
AP/PDA X910XXU1AWHA
CSC X910OXM1AWHA
Modem CP Version / Baseband X910XXU1AWHA
Product code ZTO
Model References SM-X910NZAHZTO, SM-X910NZADZTO
Build / Release Date 2023-09-01
Security Patch Level 2023-08-01 (August 1, 2023)
Size 8.6GB
Advertisements
Download Google Drive

1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.

Advertisements

2: Download and extract the [su_highlight background=”#fffe99″]Galaxy Tab S9 Ultra (Wi-Fi) SM-X910 U1 Firmware [/su_highlight]files on your computer.

3: Now, Switch off your Smartphone.

4: Boot into Download Mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

Advertisements

5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Click the PDA button, and choose the Firmware.tar file.

Advertisements

9: Click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once you see the Pass message in Odin, you can disconnect your device from the pc.
The flashing process will begin and should take about 10–12 minutes. Your device may take some time to reboot, but don’t be alarmed.

When your Galaxy Tab S9 Ultra (Wi-Fi) SM-X910 U1 finally boots up, you should be running your desired firmware.

Advertisements

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Troubleshooting

If you encounter any problems during the firmware update process, here are a few things you can try:

  1. Restart your device and retry the installation process.
  2. Ensure your device has sufficient battery.
  3. If you continue to encounter problems, you may need to perform a factory reset on your device.

Conclusion

Installing the latest firmware on your Galaxy Tab S9 Ultra (Wi-Fi) SM-X910 U1 can bring several improvements to your device, including bug fixes and new features. If you follow the steps outlined in this guide, you can successfully update your device to the latest firmware version. If you encounter any problems during the installation process, refer to the troubleshooting section of this guide for help.

Must Read:

Advertisements

Tags

Leave a Reply

Your email address will not be published. Required fields are marked *