If you own a Galaxy A13 SM-A135M smartphone and are looking to upgrade your device’s firmware to the latest version, this guide is for you. The latest firmware version for the Galaxy A13 SM-A135M U4 With 2023-11-01 (November 1, 2023) Security Patch Level, and in this article, we will show you how to install it on your device.
Samsung Galaxy A13 SM-A135M Binary 4 Android 13 Argentina ARO A135MUBS4CWK2
Benefits of Updating Firmware
There are various reasons to flash “Stock Firmware on Galaxy A13 SM-A135M U4“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Preparation:
- Supported Phone: Galaxy A13 SM-A135M U4
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
How To Install Galaxy A13 SM-A135M U4 Stock Firmware:
Download Galaxy A13 SM-A135M U4 Latest Firmware:
SM-A135M U4 Argentina ARO A135MUBS4CWK2:
Model | SM-A135M Binary 4 U4, S4, Bit 4 |
Region / Country | Argentina |
Language | Multi-Language |
Android Version | Android 13 T |
Operator / Carrier | Clean ARO (without logo, operator apps) |
AP/PDA | A135MUBS4CWK2 |
CSC | A135MOWO4CWK2 |
Modem CP Version / Baseband | A135MUBS4CWK2 |
Product code | RIM |
Build / Release Date | 2024-01-03 |
Security Patch Level | 2023-11-01 (November 1, 2023) |
Size | 4.2GB |
Download | Google Drive |
1: Install the Samsung USB Driver on your pc.
2: Download and extract the Galaxy A13 SM-A135M U4 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button, and choose the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
When your Galaxy A13 SM-A135M U4 finally boots up, you should run your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Troubleshooting
If you encounter any problems during the firmware update process, here are a few things you can try:
- Restart your device and retry the installation process.
- Ensure your device has sufficient battery.
- If you continue to encounter problems, you may need to perform a factory reset on your device.
Conclusion
Installing the latest firmware on your Galaxy A13 SM-A135M U4 can bring several improvements to your device, including bug fixes and new features. By following the steps in this guide, you can update your device to the latest firmware successfully.