If you own a Galaxy A32 SM-A325M/DS U5 smartphone and are looking to upgrade your device’s firmware to the latest version, this guide is for you. The latest firmware version for the Galaxy A32 SM-A325M/DS U5 With 2023-06-01 (June 1, 2023) Security Patch Level, and in this article, we will show you how to install it on your device.
Samsung Galaxy A32 SM-A325M/DS Binary 5 Android 13 Brazil Tim ZTM A325MUBU5DWF1
Benefits of Updating Firmware
There are various reasons to flash “Stock Firmware on Galaxy A32 SM-A325M/DS U5“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Return to stock for warranty coverage.
Preparation:
- Supported Phone: Galaxy A32 SM-A325M/DS U5
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
- Backup Android Phone
- Download and install Samsung USB Driver
- Download Odin’s Latest version
How To Install Galaxy A32 SM-A325M/DS U5 Stock Firmware:
Download Galaxy A32 SM-A325M/DS U5 Latest Firmware:
SM-A325M/DS U5 Brazil Tim ZTM A325MUBU5DWF1:
| Model | SM-A325M Binary 5 U5, S5, Bit 5 |
| Region / Country | Brazil |
| Language | Multi-Language |
| Android version | Android 13 T |
| Operator / Carrier | Tim ZTM |
| AP / PDA | A325MUBU5DWF1 |
| CSC | A325MOWO5DWF1 |
| Modem CP Version / Baseband | A325MUBU5DWE4 |
| product code | ZTM |
| Build Date | 2023-06-08 |
| Security Patch Level | 2023-06-01 (June 1, 2023) |
| Size | 5.4GB |
| Brazil Tim ZTM | Google Drive |
| Brazil ZTO |
Google Drive |
| Brazil Vivo ZVV |
Google Drive |
| Brazil Claro ZTA |
Google Drive |
1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.
2: Download and extract the Galaxy A32 SM-A325M/DS U5 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button, and choose the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
When your Galaxy A32 SM-A325M/DS U5 finally boots up, you should be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy A32 SM-A325M/DS U5 Firmware“.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of the information in this guide.
- Phone must have a 70–80% charge.
Troubleshooting
If you encounter any problems during the firmware update process, here are a few things you can try:
- Restart your device and retry the installation process.
- Ensure your device has sufficient battery.
- If you continue to encounter problems, you may need to perform a factory reset on your device.
Conclusion
Installing the latest firmware on your Galaxy A32 SM-A325M/DS U5 can bring several improvements to your device, including bug fixes and new features. By following the steps in this guide, you can update your device to the latest firmware successfully.