How To Flash Nokia N6 Firmware [Stock ROM] | AioMobileStuff

Suppose your Nokia N6 phone is corrupt or bricked. Download the Nokia N6 stock firmware from here. To get it back to a working condition again.

All you have to do is download the below-given Nokia N6 firmware files and tools on your PC. Then follow the given instructions to install the Stock ROM on the Nokia N6 using the SP Flash Tool. This guide is also helpful to unroot. Or fix any software malfunctioning problem.

Nokia N6 Firmware Details:

Device Supported: Nokia N6	No Twrp And Nand Backup
Tool Supported: SP Flash Tool	No Customization And cloaking
Soc: MT6580	No ADB Ad Block
Os: Android 7.0	Pre-installed OEM apps

[quads id=2]

Download

Firmware/Flash File

The Benefit Of Nokia N6 Firmware:

Flash Stock ROM to unbrick
Update and downgrade
Unroot or fix bugs on the phone
To solve the lag or stutter
Fix software issues.
Revert to stock to get your warranty
Keeps rebooting issue
If your phone boots straight into recovery
The phone boots straight into its bootloader

[/su_note]

Requirements To Flash Nokia N6 Stock ROM:

Charge your mobile: Your phone may no less than a half charge.
Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Full Backup

Before going to install stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

Download the Nokia N6 Flash Tool And Drivers:

A. Download and install Nokia N6 Drivers. The necessary communication between your device and PC.

These drivers are mainly for the devices powered by the MediaTek chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the Sp flash tool for as Nokia N6 Flash Tool because this tool is very efficient and supports all kinds of MTK phones.

Instructions to Flash Nokia N6 Stock ROM:

1. First of all Download the ‘Nokia_N6_MT6580_04052018_7.0 flash file zip‘ which is given above and extract it on your computer’s desktop. Also, download and extract the sp flash tool.

2. Then download the USB driver and set up it on your computer. In case you have already installed the USB driver on your computer skip this step.

3. Next, switch off your smartphone and take away the battery (if it is removable).

4. Now go to the sp flash tool extract folder and launch it.

5. As soon as the SP Flash tool is launched, click on the Download tab.

6. Now, click on the Scatter-loading button within the download tab.

7. Choose the scatter file from the firmware extract folder.

8. Now click on the Download button to start the flashing process.

9. Next, connect your phone to your computer using the USB cable (without battery – if the battery is removable) and press the volume up or volume down button at the same time.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two.

As soon as it’s over, you will notice the Download OK green ring in the SP Flash Tool.

Now, close the SP Flash tool and unplug your smartphone.

That’s it. Now you’ve successfully flashed stock ROM on your Nokia N6.

Follow Detailed instructions to Flash Firmware With Sp Flash Tool.

Disclaimer:

Read and understand the Full Guide before flashing.”Nokia N6 Firmware”.
Use these instructions at your own risk.
Before flashing, Stock ROM must have a 70–80% charge.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of MTK phones, you will have a brick even if you download these blocks read from a phone which you own!

Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.