Galaxy Tab A9+ 5G SM-X216B U1 Firmware – X216BXXU1AWI8
If you have a Galaxy Tab A9+ 5G SM-X216B and are looking to upgrade to the latest X216BXXU1AWI8 firmware version, this guide will help you out. The latest firmware for the Galaxy Tab A9+ 5G SM-X216B U1 includes the September 1, 2023 Security Patch Level. In this article, we’ll guide you on how to install it on your device.
Samsung Galaxy Tab A9+ 5G SM-X216B Binary 1 Android 13 Brazil ZTO X216BXXU1AWI8
SM-X216B U1 Brazil ZTO X216BXXU1AWI8:
| Model | SM-X216B Binary 1 U1, S1, Bit 1 |
| Region / Country | Brazil |
| Language | Multi-Language |
| Android Version | Android 13 |
| Operator / Carrier | Clean ZTO (without logo, operator apps) |
| AP/PDA | X216BXXU1AWI8 |
| CSC | X216BOWO1AWI6 |
| Modem CP Version / Baseband | X216BXXU1AWI6 |
| Product code | ZTO |
| Model References | at |
| Build / Release Date | 2023-10-04 |
| Security Patch Level | 2023-09-01 (September 1, 2023) |
| Size | 4.4GB |
| Download | Google Drive |
Preparation:
- Supported Phone: Galaxy Tab A9+ 5G SM-X216B
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
How To Install Galaxy Tab A9+ 5G SM-X216B U1 Stock Firmware:
1: Install the Samsung USB Driver on your pc.
2: Download and extract the [su_highlight background=”#fffe99″]Galaxy Tab A9+ 5G SM-X216B Firmware [/su_highlight]files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button, and choose the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
When your Galaxy Tab A9+ 5G SM-X216B finally boots up, you should run your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”