If you own a Galaxy S23+ SM-S916B smartphone and want to upgrade your device’s firmware to the latest version, this guide is for you. The latest firmware version for the Galaxy S23+ SM-S916B U3 With 2023-10-01 (October 1, 2023) Security Patch Level, and in this article, we will show you how to install it on your device.
Samsung Galaxy S23+ SM-S916B Binary 3 Android 14 Panama TPA S916BXXU3BWJM
Benefits of Updating Firmware
There are various reasons to flash “Stock Firmware on Galaxy S23+ SM-S916B U3“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Return to stock for warranty coverage.
Preparation:
- Supported Phone: Galaxy S23+ SM-S916B U3
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
How To Install Galaxy S23+ SM-S916B U3 Stock Firmware:
Download Galaxy S23+ SM-S916B U3 Latest Firmware:
| Model | SM-S916B Binary 3 U3, S3, Bit 3 |
| Region / Country | Panama |
| Language | Multi-Language |
| Android Version | Android 14 One UI 6.0 |
| Operator / Carrier | Clear TPA (without logo, operator apps) |
| AP/PDA | S916BXXU3BWJM |
| CSC | S916BOWO3BWJM |
| Modem CP Version / Baseband | S916BXXU3BWJM |
| Product code | TPA |
| Build / Release Date | 2023-10-31 |
| Security Patch Level | 2023-10-01 (October 1, 2023) |
| Size | 9.2GB |
| Download | Google Drive |
1: Install the Samsung USB Driver on your pc.
2: Download and extract the [su_highlight background=”#fffe99″]Galaxy S23+ SM-S916B U3 Firmware [/su_highlight]files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.
6: Open Odin. Then, connect your phone to the pc.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy S23+ SM-S916B U3 finally boots up, you should run your desired firmware.
If you want to check that the correct firmware is installed, head to Settings –> About Phone –> Software
Troubleshooting
If you encounter any problems during the firmware update process, here are a few things you can try:
- Restart your device and retry the installation process.
- Ensure your device has sufficient battery.
- If you continue encountering problems, you may need to perform a factory reset on your device. This will erase all of your data, so be sure to back up your data before performing a factory reset.
Conclusion
Installing the latest firmware on your Galaxy S23+ SM-S916B U3 can improve your device, including bug fixes and new features. If you follow the steps outlined in this guide, you should be able to update your device to the latest firmware version successfully. If you encounter any problems during the installation process, refer to the troubleshooting section of this guide for help.
Must Read:
- 7 Tips to increase Samsung Galaxy battery life
- Remove the black bar from the Samsung keyboard
- Disable the camera geotag on Samsung phones
- Steps To Record The Samsung Galaxy Screen
- Fix Moisture Detected on Samsung
- Download USB Drivers for Samsung Mobiles
- KnoxPatch: LSPosed Module to Restore Samsung Knox Features
