Galaxy A13 SM-A137F Binary 3 Firmware – A137FXXS3CWI3
If you own a Galaxy A13 SM-A137F smartphone and want to upgrade the firmware to the latest version, this guide is for you. The latest firmware version includes the 2023-09-01 Security Patch. In this article, we will show you how to install the firmware on your device.
Samsung Galaxy A13 SM-A137F Binary 3 Android 13 Israel ILO A137FXXS3CWI3
SM-A137F U3 Israel ILO A137FXXS3CWI3:
| Model | SM-A137F Binary 3 U3, S3, Bit 3 |
| Region / Country | Israel |
| Language | Multi-Language |
| Android OS Version | Android 13 T |
| Operator | Clean ILO (without logo, operator apps) |
| AP/PDA | A137FXXS3CWI3 |
| CSC | A137FOJM3CWE1 |
| Modem CP Version / Baseband | A137FXXU3CWE1 |
| Product code | ILO |
| Build / Release Date / Launch | 2023-09-27 |
| Security Patch Level | 2023-09-01 (September 1, 2023) |
| Size | 3.6GB |
| Download | Google Drive |
Preparation:
- Supported Phone: Galaxy A13 SM-A137F
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
How To Install Galaxy A13 SM-A137F U3 Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer.
2: Download and extract the [su_highlight background=”#fffe99″]Galaxy A13 SM-A137F Firmware [/su_highlight]files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Once Odin detects your device, click the PDA button, and select the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once the Firmware process is completed you can see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
When your Galaxy A13 SM-A137F finally boots up, you should be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”