Galaxy A04e SM-A042M/DS U4 Firmware
If you own a Galaxy A04e SM-A042M/DS smartphone and want to upgrade your device’s firmware to the latest version, this guide is for you. The latest firmware version for the Galaxy A04e SM-A042M/DS U4 With 2023-09-01 (September 1, 2023) Security Patch Level, and in this article, we will show you how to install it on your device.

Samsung Galaxy A04e SM-A042M/DS Binary 4 Android 13 Brazil Vivo ZVV A042MUBS4CWJ1

Benefits of Updating Firmware

There are various reasons to flash “Stock Firmware on Galaxy A04e SM-A042M/DS U4“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Return to stock for warranty coverage.

Preparation:

How To Install Galaxy A04e SM-A042M/DS U4 Stock Firmware:

Download Galaxy A04e SM-A042M/DS U4 Latest Firmware:

SM-A042M/DS U4 Brazil Vivo ZVV A042MUBS4CWJ1:

Advertisements
ModelSM-A042M Binary 4 U4, S4, Bit 4
Region / CountryBrazil
LanguageMulti-Language
Android VersionAndroid 13 T
Operator / CarrierVivo ZVV
AP/PDAA042MUBS4CWJ1
CSCA042MOWO4CWJ1
Modem CP Version / BasebandA042MUBS4CWJ1
Product codeZVV
Build / Release Date2023-10-30
Security Patch Level2023-09-01 (September 1, 2023)
Size4.5GB
Advertisements
DownloadGoogle Drive

1: Download and Install the Samsung USB Driver on your computer. If a Samsung USB Driver is installed on your computer, then Skip this Step.

2: Download and extract the [su_highlight background=”#fffe99″]Galaxy A04e SM-A042M/DS U4 Firmware [/su_highlight]files on your computer.

3: Now, Switch off your Smartphone.

Advertisements

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.

Advertisements

6: Open Odin. Then, connect your phone to the pc.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Click the PDA button and select the Firmware.tar file.

Advertisements

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.

Advertisements

When your Galaxy A04e SM-A042M/DS U4 finally boots up, you should run your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

Advertisements
  • Read and understand the Full Guide before flashing.”Galaxy A04e SM-A042M/DS U4 Firmware“.
  • Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
  • Phone must have a 70–80% charge.

Troubleshooting

If you encounter any problems during the firmware update process, here are a few things you can try:

  1. Restart your device and retry the installation process.
  2. Ensure your device has sufficient battery.
  3. If you continue encountering problems, you may need to perform a factory reset on your device. This will erase all of your data, so be sure to back up your data before performing a factory reset.

Conclusion

Installing the latest firmware on your Galaxy A04e SM-A042M/DS U4 can bring several improvements to your device, including bug fixes and new features. If you follow the steps outlined in this guide, you can successfully update your device to the latest firmware version. If you encounter any problems during the installation process, refer to the troubleshooting section of this guide for help.

Must Read:

Advertisements

RELATED ARTICLESMORE FROM AUTHOR

LEAVE A REPLY

Please enter your comment!
Please enter your name here