- Charge your mobile: Your phone may charge no less than half a charge.
- Laptop or PC: To execute this installation, you must use a PC or Laptop.
- Take Full Backup
Before installing stock ROM, you must back up your smartphone’s messages, photos, and apps. Most smartphones automatically make a backup in the background. But to ensure you take everything to your new device, you need a full backup.
- Download Moto G73 5G XT2237-2 Flash Tool And Drivers:
- A. Download and install Moto G73 5G XT2237-2 Drivers. The necessary communication between your device and PC.
These drivers are mainly for the devices powered by the MediaTek chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.
- B. We use the Sp flash tool as Moto G73 5G XT2237-2 because this tool is very efficient and supports all kinds of MTK phones.
Downloading the Correct Firmware for Your Device:
The first step in updating your firmware is to ensure you have the correct file for your device. This can usually be found on the manufacturer’s website. In this case, you can download the firmware file for the Moto G73 5G XT2237-2.
Updating Your Firmware Using a Firmware Update Tool
Once you have downloaded the correct firmware file, you can use a firmware update tool to update your device. Several firmware update tools are available, and the specific steps to use them may vary. However, the general steps are as follows:
1. First, Download the ‘Moto G73 5G XT2237-2 flash file above and extract it on your desktop. Also, download and extract the sp flash tool.
2. Then download the USB driver and set it up on your computer. If you have already installed the USB driver on your computer, skip this step.
3. Next, switch off your smartphone and take away the battery (if it is removable).
4. Now go to the sp flash tool extract folder and launch it.
5. When launching the SP Flash tool, click the Download tab.
6. Now, click on the Scatter-loading button within the download tab.
7. Choose the scatter file from the firmware extract folder.
8. Now click on the Download button to start the flashing process.
9. Next, connect your phone to your computer using the USB cable (without battery – if the battery is removable) and press the volume up or down button simultaneously.
10. The flashing process will start momentarily and get accomplished in a minute or two.
You will notice the Download OK green ring in the SP Flash Tool as soon as it’s over. Now, close the SP Flash tool and unplug your smartphone. That’s it. You’ve successfully flashed stock ROM on your Moto G73 5G XT2237-2.
Follow Detailed Instructions to Flash Firmware With Sp Flash Tool
Common Issues and Solutions During the Firmware Update Process:
Although the firmware update process is generally straightforward, issues may arise. Some of the most common issues and their solutions are:
- Device not detected by the firmware update tool: Ensure that your device is connected to your computer and that the USB cable works correctly.
- If the update process is stuck or takes too long, Try restarting your device and the firmware update tool and then retrying the update process.
- Update fails: This can be caused by several factors, including a faulty firmware file, a problem with the firmware update tool, or a problem with your device. Try downloading a different firmware file, using a different update tool, or contacting the manufacturer for assistance.
Conclusion:
In conclusion, updating the firmware for your Moto G73 5G XT2237-2 is an essential step to ensure its optimal performance. With this comprehensive guide, you should have all the information you need to update your firmware successfully. If you encounter any issues during the process, refer to the common issues and solutions section for assistance.