If you own a Galaxy A22 5G SM-A226BR/DSN smartphone and want to upgrade your device’s firmware to the A226BRUBU8DWK2 version, this guide is for you. The latest firmware version for the Galaxy A22 5G SM-A226BR/DSN U8 is 2023-10-01 (October 1, 2023) Security Patch Level, and in this article, we will show you how to install it on your device.
Samsung Galaxy A22 5G SM-A226BR/DSN Binary 8 Android 13 Brazil ZTO A226BRUBU8DWK2
Download Galaxy A22 5G SM-A226BR/DSN U8 Latest Firmware:
SM-A226BR/DSN U8 Brazil ZTO A226BRUBU8DWK2:
| Model | SM-A226BR Binary 8 U8, S8, Bit 8 |
| Region / Country | Brazil |
| Language | Multi-Language |
| Android Version | Android 13 T |
| Operator / Carrier | Clean ZTO (without logo or operator apps) |
| AP/PDA | A226BRUBU8DWK2 |
| CSC | A226BROWO8DWK2 |
| Modem CP Version / Baseband | A226BRUBU8DWK2 |
| Product code | ZTO |
| Model References | SM-A226BZARZTO, SM-A226BZWRZTO |
| Build / Release Date | 2023-11-17 |
| Security Patch Level | 2023-10-01 (October 1, 2023) |
| Size | 4.8GB |
| Brazil ZT | Google Drive |
| Brazil ZTO | Google Drive |
| Brazil Claro ZTA | Google Drive |
Preparation:
- Supported Phone: Galaxy A22 5G SM-A226BR/DSN
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
How To Install Galaxy A22 5G SM-A226BR/DSN U8 Stock Firmware:
1: Install the Samsung USB Driver on your PC.
2: Download and extract the Galaxy A22 5G SM-A226BR/DSN U8 Firmware files on your computer.
3: Now, switch off your smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.
6: Open Odin. Then, connect your phone to the PC.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the flashing.
10: Flashing usually takes 30–50 seconds to complete on your phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy A22 5G SM-A226BR/DSN U8 finally boots up, you should run your desired firmware.
To verify the installed firmware, go to Settings > About Phone > Software Information. Check the firmware number under “Baseband version.”
