If you own a Galaxy Tab Active3 LTE SM-T575 smartphone and are looking to upgrade your device’s firmware to the T575XXS7EWK2 version, this guide is for you. The latest firmware version for the Galaxy Tab Active3 LTE SM-T575 U7 With 2023-11-01 (November 1, 2023) Security Patch Level is available, and in this article, we will show you how to install it on your device.
Samsung Galaxy Tab Active3 LTE SM-T575 Binary 7 Android 13 Brazil ZTO T575XXS7EWK2
SM-T575 U7 Android 13 Brazil ZTO T575XXS7EWK2:
| Model | SM-T575 Binary 7 U7, S7, Bit 7 |
| Region / Country | Brazil |
| Language | Multi-Language |
| Android Version | Android 13 T |
| Operator / Carrier | Clean ZTO (without logo or operator apps) |
| AP/PDA | T575XXS7EWK2 |
| CSC | T575OWO7EWK2 |
| Modem CP Version / Baseband | T575XXS7EWK2 |
| Product code | ZTO |
| Model Reference | SM-T575NZKPL05 |
| Build / Release Date | 2023-11-15 |
| Security Patch Level | 2023-11-01 (November 1, 2023) |
| Size | 4.5GB |
| Download | Google Drive |
Preparation:
- Supported Phone: Galaxy Tab Active3 LTE SM-T575
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
How To Install Galaxy Tab Active3 LTE SM-T575 U7 Stock Firmware:
1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.
2: Download and extract the Galaxy Tab Active3 LTE SM-T575 U7 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button, and choose the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
The flashing process will begin and should take about 10–12 minutes. Your device may take some time to reboot, but don’t be alarmed.
When your Galaxy Tab Active3 LTE SM-T575 U7 finally boots up, you should be running your desired firmware.
To verify the installed firmware, go to Settings > About Phone > Software Information. Check the firmware number under “Baseband version.
