If you own a Galaxy A03 SM-A035M/DS smartphone and want to upgrade your device’s firmware to the A035MUBS5CWL2 version, this guide is for you. The latest firmware version for the Galaxy A03 SM-A035M/DS U5 is 2023-12-01 (December 1, 2023) Security Patch Level, and in this article, we will show you how to install it on your device.
Samsung Galaxy A03 SM-A035M/DS Binary 5 Android 13 Brazil Claro ZTA A035MUBS5CWL2
SM-A035M/DS U5 Brazil Claro ZTA A035MUBS5CWL2:
| Model | SM-A035M Binary 5 U5, S5, Bit 5 |
| Region / Country | Brazil |
| Language | Multi-Language |
| Android Version | Android 13 T |
| Operator / Carrier | Of course, ZTA |
| AP/PDA | A035MUBS5CWL2 |
| CSC | A035MOWO5CWL2 |
| Modem CP Version / Baseband | A035MUBU5CWK1 |
| Product code | ZTA |
| Build / Release Date | 2023-12-21 |
| Security Patch Level | 2023-12-01 (December 1, 2023) |
| Size | 4.5GB |
| Brazil Claro ZTA | Google Drive |
| Brazil ZTO | Google Drive |
Preparation:
- Supported Phone: Galaxy A03 SM-A035M/DS
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
How To Install Galaxy A03 SM-A035M/DS U5 Stock Firmware:
1: Install the Samsung USB Driver on your PC.
2: Download and extract the Galaxy A03 SM-A035M/DS U5 Firmware files on your computer.
3: Now, switch off your smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.
6: Now, download and open Odin. Then connect your smartphone to the computer.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the flashing.
10: Flashing usually takes 30–50 seconds to complete on your phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
The flashing process will begin and should take about 10–12 minutes. Your device may take some time to reboot, but don’t be alarmed.
When your Galaxy A03 SM-A035M/DS U5 finally boots up, you should run your desired firmware.
To verify the installed firmware, go to Settings > About Phone > Software Information. Check the firmware number under “Baseband version.”
