If you own a Galaxy A03 Core SM-A032F smartphone and want to upgrade your device’s firmware to the A032FXXU4CWI8 version, this guide is for you. The latest firmware version for the Galaxy A03 Core SM-A032F U4 is 2023-09-01 (September 1, 2023) Security Patch Level, and in this article, we will show you how to install it on your device.
Samsung Galaxy A03 Core SM-A032F Binary 4 Android 13 Russia SER A032FXXU4CWI8
Download Galaxy A03 Core SM-A032F U4 Latest Firmware:
Model | SM-A032F Binary 4 U4, S4, Bit 4 |
Region / Country | Russia |
Language | Multi-Language |
Android Version | Android 13 T—Android GO Edition |
Operator, Operator / Carrier | Clean SER (without logo and operator apps) |
AP/PDA | A032FXXU4CWI8 |
CSC | A032FOXM4CWI8 |
Modem CP Version / Baseband | A032FXXU4CWI8 |
Product code | TO BE |
Build / Release Date | 2023-09-27 |
Security Patch Level | 2023-09-01 (September 1, 2023) |
Size | 2GB |
Download | Google Drive |
Preparation:
- Supported Phone: Galaxy A03 Core SM-A032F
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
How To Install Galaxy A03 Core SM-A032F U4 Stock Firmware:
1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.
2: Download and extract the Galaxy A03 Core SM-A032F U4 Firmware files on your computer.
3: Now, switch off your smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.
6: Now, download and open Odin. Then connect your smartphone to the computer.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button and choose the Firmware.tar file.
9: Click the Start button in Odin to begin the flashing.
10: Flashing usually takes 30–50 seconds to complete the process on your phone.
Once you see the Pass message in Odin, you can disconnect your device from the PC.
The flashing process will begin and should take about 10–12 minutes. Your device may take some time to reboot, but don’t be alarmed.
When your Galaxy A03 Core SM-A032F U4 finally boots up, you should be running your desired firmware.
To verify the installed firmware, go to Settings > About Phone > Software Information. Check the firmware number under “Baseband version.”