If you own a Galaxy A03 Core SM-A032M smartphone and want to upgrade your device’s firmware to the A032MUBU3CWI8 version, this guide is for you. The latest firmware version for the Galaxy A03 Core SM-A032M U3 is 2023-09-01 (September 1, 2023) Security Patch Level, and in this article, we will show you how to install it on your device.
Samsung Galaxy A03 Core SM-A032M Binary 3 Android 13 Argentina ARO A032MUBU3CWI8
Download Galaxy A03 Core SM-A032M U3 Latest Firmware:
SM-A032M U3 Argentina ARO A032MUBU3CWI8:
| Model | SM-A032M Binary 3: U3, S3, Bit 3 |
| Region / Country | Argentina |
| Language | Multi-Language |
| Android Version | Android 13 T |
| Operator / Carrier | Clean ARO (without logo and operator apps) |
| AP/PDA | A032MUBU3CWI8 |
| CSC | A032MOWO3CWJ1 |
| Modem CP Version / Baseband | A032MUBU3CWI8 |
| Product code | RIM |
| Build / Release Date | 2023-11-13 |
| Security Patch Level | 2023-09-01 (September 1, 2023) |
| Size | 2.2GB |
| Download | Google Drive |
Preparation:
- Supported Phone: Galaxy A03 Core SM-A032M
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
How To Update Galaxy A03 Core SM-A032M Binary 3 Firmware File
1: Install the Samsung USB Driver on your PC.
2: Download and extract the Galaxy A03 Core SM-A032M U3 Firmware files on your computer.
3: Now, switch off your smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.
6: Open Odin. Then, connect your phone to the PC.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the flashing.
10: Flashing usually takes 30–50 seconds to complete on your phone.
Once the firmware process is completed, you can see a green box with a pass written on it in Odin. During this process, the smartphone will reboot automatically.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
The flashing process will begin and should take about 10–12 minutes. Your device may take some time to reboot, but don’t be alarmed.
When your Galaxy A03 Core SM-A032M U3 finally boots up, you should run your desired firmware.
To verify the installed firmware, go to Settings > About Phone > Software Information. Check the firmware number under “Baseband version.”
