If you own a Galaxy S20 FE SM-G780G/DS smartphone and are looking to upgrade your device’s firmware to the G780GXXS8EWK8 version, this guide is for you. The latest firmware version for the Galaxy S20 FE SM-G780G/DS U7 is 2023-12-01 (December 1, 2023) Security Patch Level, and in this article, we will show you how to install it on your device.
Samsung Galaxy S20 FE SM-G780G/DS Binary 8 Android 13 Brazil ZTO G780GXXS8EWK8
SM-G780G/DS U8 Brazil ZTO G780GXXS8EWK8:
| Model | SM-G780G Binary 8 U8, S8, Bit 8 |
| Region / Country | Brazil |
| Language | Multi-Language |
| Android Version | Android 13 T |
| Operator / Carrier | Clean ZTO (without logo or operator apps) |
| AP/PDA | G780GXXS8EWK8 |
| CSC | G780GOWO8EWL1 |
| Modem CP Version / Baseband | G780GXXS8EWK8 |
| Product code | ZTO |
| Model References | SM-G780GLVJZTO, SM-G780GLVKZTO, SM-G780GZBJZTO, SM-G780GZBKZTO, SM-G780GZGJZTO, SM-G780GZGKZTO, SM-G780GZWJZTO, SM-G780GZWKZTO |
| Build / Release Date | 2023-12-13 |
| Security Patch Level | 2023-12-01 (December 1, 2023) |
| Size | 6.7GB |
| Download | Google Drive |
Pre-requirements:
- Compatible Device: Galaxy S20 FE SM-G780G/DS
- Charging: Ensure your mobile is charged to at least 50%.
- Computer: A PC or laptop is necessary to perform this installation.
- Backing Up Your Android Phone: here
- Samsung USB Driver: Samsung’s developer site.
- Download Odin:
How to Install Stock Firmware:
-
- Download the Galaxy S20 FE SM-G780G/DS G780GXXS8EWK8 Firmware files, then extract them on your computer.
- Turn off your smartphone completely.
- Press and hold the Volume Down, Home, and Power buttons simultaneously for 5-8 seconds until download mode is active. For a new phone, use this guide.
- In Download Mode, a warning sign with a yellow triangle will appear. Press the Volume Up button to continue.
- Open Odin on your PC and connect your smartphone via USB.
- Odin will display “Added” in the lower-left corner once the device is successfully connected.
- Select the Firmware.tar file by clicking on the PDA button in Odin.
- Press the Start button in Odin to initiate the firmware flashing process.
- The flashing process should be completed within 30–50 seconds.
To verify the installed firmware, navigate to Settings, select About Phone, then Software Information. Locate the firmware number listed as “Baseband version.”
Follow Us
