To begin the A045MUBS4CWK5 firmware update, make sure your Galaxy A04 SM-A045M is fully charged and connected to a stable Wi-Fi network. Next, navigate to the Settings app on your device and select “Software Update.” If the latest firmware is available, follow the on-screen instructions to download and install it. Once the update is complete, your Galaxy A04 SM-A045M will have the latest features and security enhancements to keep your device running smoothly.
Samsung Galaxy A04 SM-A045M Binary 4 Android 13 Mexico MXD A045MUBS4CWK5
Download Galaxy A04 SM-A045M U4 Latest Firmware:
SM-A045M U4 Mexico MXD A045MUBS4CWK5:
| Model | SM-A045M Binary 4 U4, S4, Bit 4 |
| Region / Country | Mexico |
| Language | Multi-Language |
| Android Version | Android 13 T |
| Operator / Carrier | MXD |
| AP/PDA | A045MUBS4CWK5 |
| CSC | A045MOWO4CWK1 |
| Modem CP Version / Baseband | A045MUBS4CWK1 |
| Product code | MXD |
| Build / Release Date | 2023-11-23 |
| Security Patch Level | 2023-10-01 (October 1, 2023) |
| Size | 4.8GB |
| Download | Google Drive |
Preparation:
- Supported Phone: Galaxy A04 SM-A045M U4
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.
2: Download and extract the Galaxy A04 SM-A045M U4 Firmware files on your computer.
3: Now, switch off your smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.
6: Now, download and open Odin. Then connect your smartphone to the computer.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button and choose the Firmware.tar file.
9: Click the Start button in Odin to begin the flashing.
10: Flashing usually takes 30–50 seconds to complete the process on your phone.
Once you see the Pass message in Odin, you can disconnect your device from the PC.
The flashing process will begin and should take about 10–12 minutes. Your device may take some time to reboot, but don’t be alarmed.
You should run your desired firmware when your Galaxy A04 SM-A045M U4 finally boots up.
To verify the installed firmware, go to Settings > About Phone > Software Information. Check the firmware number under “Baseband version.”
