SamsungStock Firmware

Galaxy A51 5G SM-A516U1 U10 Firmware File

If you own a Galaxy A51 5G SM-A516U1 smartphone and are looking to upgrade your device’s firmware to the A516U1UEUAGWF1 version, this guide is for you. The latest firmware version for the Galaxy A51 5G SM-A516U1 U10 has 2023-06-01 (June 1, 2023) Security Patch Level, and in this article, we will show you how to install it on your device.

Samsung Galaxy A51 5G SM-A516U1 Binary 10 Android 13 United States USA XAA A516U1UEUAGWF1

Download Galaxy A51 5G SM-A516U1 U10 Latest Firmware:

SM-A516U1 U10 United States USA XAA A516U1UEUAGWF1:

Model SM-A516U1 Binary 10 U10, S10, Bit 10
Region / Country United States
Language Multi-Language
Android version Android 13 T
Operator / Carrier Cleans XAA (without logo, operator apps)
AP/PDA A516U1UEUAGWF1
CSC A516U1OYMAGWF1
Modem CP Version / Baseband A516U1UEUAGWF1
Product code XAA
Build Date 2023-07-11
Security Patch Level 2023-06-01 (June 1, 2023)
Size 5GB
[quads id=2]
Download Google Drive

Preparation:

How To Install Galaxy A51 5G SM-A516U1 U10 Stock Firmware:

1: Download and Install the Samsung USB Driver on your computer.

2: Download and extract the   Galaxy A51 5G SM-A516U1 U10 Firmware   files on your computer.

3: Now, switch off your smartphone.

4: Boot into Download Mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.

6: Open Odin. Then, connect your phone to the PC.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Once Odin detects your device, click on the PDA button and select the Firmware.tar file.

9: Click the Start button in Odin to begin the flashing.

10: Flashing usually takes 30–50 seconds to complete the process on your phone.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.

When your Galaxy A51 5G SM-A516U1 U10 finally boots up, you should be running your desired firmware.

To verify the installed firmware, go to Settings > About Phone > Software Information. Check the firmware number under “Baseband version.”

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button