If you own a Galaxy A04e SM-A042M/DS smartphone and are looking to upgrade your device’s firmware to the A042MUBS5CWK2 version, this guide is for you. The latest firmware version for the Galaxy A04e SM-A042M/DS U5 is 2023-10-01 (October 1, 2023) Security Patch Level, and in this article, we will show you how to install it on your device.
Samsung Galaxy A04e SM-A042M/DS Binary 5 Android 13 Brazil ZTO A042MUBS5CWK2
Download Galaxy A04e SM-A042M/DS U5 Latest Firmware:
SM-A042M/DS U5 Brazil ZTO A042MUBS5CWK2:
| Model | SM-A042M Binary 5 U5, S5, Bit 5 |
| Region / Country | Brazil |
| Language | Multi Language |
| Android Version | Android13 T |
| Operator / Carrier | Clean ZTO (without logo or operator apps) |
| AP/PDA | A042MUBS5CWK2 |
| CSC | A042MOWO5CWJ6 |
| Modem CP Version / Baseband | A042MUBS5CWJ6 |
| Product code | ZTO |
| Model References | SM-A042MLBPZTO, SM-A042MZCPZTO, SM-A042MZKPZTO, SM-A042MLBHZTO, SM-A042MZCHZTO, SM-A042MZKHZTO |
| Build / Release Date | 2023-11-13 |
| Security Patch Level | 2023-10-01 (October 1, 2023) |
| Size | 4.5GB |
| Brazil ZTO | Google Drive |
| Brazil Vivo ZVV | Google Drive |
Preparation:
- Supported Phone: Galaxy A04e SM-A042M/DS
- Charge your mobile: You may charge no less than a half charge.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
How To Install Galaxy A04e SM-A042M/DS U5 Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer.
2: Download and extract the Galaxy A04e SM-A042M/DS U5 Firmware files on your computer.
3: Now, switch off your smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.
6: Open Odin. Then, connect your phone to the PC.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Once Odin detects your device, click on the PDA button and select the Firmware.tar file.
9: Click the Start button in Odin to begin the flashing.
10: Flashing usually takes 30–50 seconds to complete the process on your phone.
Once the firmware process is completed, you will be able to see a green box with a pass written on it in Odin. During this process, the smartphone will reboot automatically.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy A04e SM-A042M/DS U5 finally boots up, you should be running your desired firmware.
To verify the installed firmware, go to Settings > About Phone > Software Information. Check the firmware number under “Baseband version.”
