In this guide, I will show you how to how to flash Zte k88 tablet Firmware. This method also work if you want to install fresh Stock ROM or update Firmware like Android 7.0 Nougat. revert from any ZTE Trek 2 HD K88 custom build and unroot.
This article contains the ZTE Trek 2 HD K88 Firmware Flash File. That will allow you to recover your ZTE Trek 2 HD K88 mobile into its initial Factory state.
Additionally, you can use the file to change your phone to the newest version. You’ll find these below files useful if you have used the flashed customized builds. Brick your device, change your device and also come back that device to the factory state.
How To Flash ZTE Trek 2 HD K88 Firmware File [ROM]
We will use Sp Flash Tool to unbrick the ZTE Trek 2 HD K88 as we use for Zte v5-max-n958st. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your ZTE Trek 2 HD K88.
[quads id=2]The Advantages ZTE Trek 2 HD K88 Stock Firmware:
- Revert form ZTE Trek 2 HD K88 custom ROM
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Return to stock for warranty coverage.
ZTE Trek 2 HD K88 Stock Firmware Details:
- Gapps File: Included
- Device Supported: ZTE Trek 2 HD K88
- Tool Supported: SP Flash Tool
- Processor: MediaTek
Download
[quads id=2]
Pre-requirements to Install ZTE Trek 2 HD K88 Stock ROM:
- Supported Phone: ZTE Trek 2 HD K88
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
Take Phone Backup:
ZTE Trek 2 HD K88 Flashing Tool And Drivers:
- ZTE Trek 2 HD K88 Flash Tool: Download the latest SP Flash tool and extract it (Install)
- ZTE Trek 2 HD K88 VCOM driver: Get VCOM Driver and set up on your pc (still works with MT67xx phones)
- Windows 10/Pro users: READ: How To Install MTK USB Vcom Driver On Windows 10 (32 & 64 bits)
Disclaimer:
- Please read and understand the Full Guide Before Flashing ZTE Trek 2 HD K88 Stock ROM.
- Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
- Make sure that the USB drivers for your device are installed on the computer.
- Your smartphone must have a 70–80% charge.
- Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.
Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.
Instructions to Install ZTE Trek 2 HD K88 Stock ROM:
Step 1: Extract And Run SP flash tool.
Step 2: Install MTK android USB drivers.
Step 3: Then download ZTE Trek 2 HD K88 Firmware.
Step 4: Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.
Step 5: Now open SP flash tool.exe.
Step 6: When the SP flash tool opens, go to the download button in the SP flash tool.
Step 7: In the download tab, click on the scatter load button.
Step 8: After locating the scatter tab, click on the download button.
Step 9: Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
Step 10: When flashing is completed, a green ring will appear in the SP flash tool.
Step 11: Close the SP flash tool on your computer and unplug the phone.
Step 12: Power on the phone and enjoy it.
Step 13: After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.
Follow Detailed Instruction ZTE Trek 2 HD K88 Firmware Update Flashing With Sp Flash Tool.
