Zte Nubia M2 Lite NX573J Android 6.0 Flash Files
The Benefit Of Stock ROM:
You Can Use The Following Flash Files For Upgrade or Unbrick/ And If You Want To Hard Reset It By Flashing The Stock ROM/ In Case If You Are Using Any Custom Rom And Want Back To Stock Rom And Official Firmware Or Facing The Boot Loop Problem. This Method Is Also Useful For Sudden Death/Bricked/Not Power And Also After Flashing The Stock Firmware IMEI Null or Unknown Baseband Problems Can Be Solved.
- Aiomobilestuff.com is not responsible for any damage happened to your devices while following this guide so please proceed at your own risk. However, we would be happy to help with any problems within our reach.
- Please Read and understand the Full Guide Before Flashing umer Stock Rom.
- Make sure that the USB drivers for your device are installed on the computer.
- Your smartphone must have a 70–80% charge.
- If you are going to flash the Stock Firmware on your MediaTek device, then take a backup of important data such as Contacts, Call logs, SMS, and other data as because your personal data will be deleted after flashing the Stock Firmware.
Take Phone Backup:
Don’t flash another preloader and DSP_BL blocks!
It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.
We will use Sp Flash Tool to unbrick the MTK Device by Flashing Stock ROM. This tool is really very efficient. Just Follow the step by step procedure to use One Click Unbrick Tool and unbrick your device.
Sp Flash Tool and it is used to Manually Upgrade or Flash MTK Android Smartphone or Tablet. Sp Flash Tool is used to flash only Stock Rom or Custom Firmware on Media Tek Devices which comes in .zip Format. To use Smartphone Flashing tool you first need to properly install the Latest Vcom USB Drivers for Device.
How To Flash Zte Nubia M2 Lite NX573J Android 6.0 Marshmallow With Sp Flash Tool:
Download ZTE Nubia M2 LITE (NX573J).zip
Download SD card Flashing Guide.pdf
Download NX573J Z69 EN 4SQPN1JD00L107.zip
Download NX573J Z69 EN 4SQPN1JD00L109.zip
Download NX573J Z69 EN 4SQPN1JD00L111.zip
Download NX573J Z69 EN 4SQPN1JD00L113.zip
Step 1: Extract And Run SP flash tool.
Step 2: Install MTK android USB drivers.
Step 3: Then download Stock Firmware Flash File ROM for your phone from below.
Step 4: Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.
Step 5: Now open SP flash tool.exe.
Step 6: When SP flash tool open, go to download button in SP flash tool.
Step 7: In the download tab, click on the scatter load button.
Step 8: After locating the scatter tab, click on the download button.
Step 9: Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
Step 10: When flashing is completed, a green ring will appear in SP flash tool.
Step 11: Close SP flash tool on your computer and unplug the phone.
Step 12: Power on the phone and enjoy.
Step 13: After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.
Follow Detailed Instruction Flashing With Sp Flash Tool.