Download ZTE Caribe 4 V769M Firmware Flash File For ZTE Caribe 4 V769M. If you have ZTE Caribe 4 V769M Smartphone. And You want to download the Stock ROM – Flash File For it. Then You are in the Correct Place, You have to do this by following the Below Guide.
This article contains the ZTE Caribe 4 V769M Firmware Flash File. That will allow you to recover your ZTE Caribe 4 V769M mobile into its initial Factory state. Additionally, you can use the file to change your phone to the newest version.
You’ll find these below files useful if you have used the flashed customized builds. Brick your device, change your device and also come back that device to the factory state.
ZTE Caribe 4 V769M Firmware Flash File [Stock ROM]:
We will use Sp Flash Tool to unbrick the ZTE Caribe 4 V769M as we use for ZTE blade l4 pro. This tool is very efficient. Follow the step-by-step procedure to use the One-Click Unbrick Tool and unbrick your ZTE Caribe 4 V769M.
[quads id=2]The Advantages of Stock Firmware:
- Flash Stock To Unbrick your ZTE Caribe 4 V769M
- Fix boot loop issue
- Update and Downgrade ZTE Caribe 4 V769M
- Unroot or Fix Bugs
- To solve the lag or stutter on ZTE Caribe 4 V769M
- Fix software issues.
- Return to stock for warranty coverage.
ZTE Caribe 4 V769M Firmware Details:
- Gapps File: Included
- Device Supported: ZTE Caribe 4 V769M
- Tool Supported: SP Flash Tool
- Processor: MediaTek MT6572
- Os: Android 4.1.2
| Download | ZTE_V769M_Caribe_4_MT6572_4.12 |
Pre-requirements to Install ZTE Caribe 4 V769M Firmware:
- Supported Phone: ZTE Caribe 4 V769M
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
Take Phone Backup:
ZTE Caribe 4 V769M Flashing Tool And Drivers:
- ZTE Caribe 4 V769M Flash Tool: Download the latest SP Flash tool and extract it (Install)
- ZTE Caribe 4 V769M VCOM driver: Get VCOM Driver and set it up on your pc (still works with MT67xx phones)
- Windows 10/Pro users: READ: How To Install MTK USB Vcom Driver On Windows 10 (32 & 64 bits)
Disclaimer:
- Please read and understand the Full Guide Before Flashing ZTE Caribe 4 V769M Stock ROM.
- Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
- Make sure that the USB drivers for your device are installed on the computer.
- Your smartphone must have a 70–80% charge.
- Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.
Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.
Instructions to Install ZTE Caribe 4 V769M Firmware:
Step 1: Extract And Run SP flash tool.
Step 2: Install MTK android USB drivers.
Step 3: Then download ZTE Caribe 4 V769M Firmware.
Step 4: Switch off the mobile remove the battery (if removable) reinsert and plug the USB cable into the charging socket.
Step 5: Now open SP flashes tool.exe.
Step 6: When the SP flash tool opens, go to the download button in the SP flash tool.
Step 7: In the download tab, click on the scatter load button.
Step 8: After locating the scatter tab, click on the download button.
Step 9: Now connect your smartphone with a USB cable and press the volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
Step 10: When flashing is completed, a green ring will appear in the SP flash tool.
Step 11: Close the SP flash tool on your computer and unplug the phone.
Step 12: Power on the phone and enjoy it.
Step 13: After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.
Follow Detailed Instruction ZTE Caribe 4 V769M Firmware Flashing With Sp Flash Tool.
