Ziox Quiq Sleek 4G Firmware File [Stock ROM]

How to flash Ziox Quiq Sleek 4G firmware and return to factory defaults? To do this, just follow all the steps in the tutorial to remove your password and unbrick your Ziox Quiq Sleek 4G. In a few minutes, you will be using your phone normally.

The procedures of the methods below, in addition to flashing the Ziox Quiq Sleek 4G Stock ROM, also apply to the models of Ziox Quiq Sleek 4G cell phones. Now that you have seen that your model is compatible with the tutorial, see the safety instructions you should follow.

Ziox Quiq Sleek 4G Firmware Flash File [Stock ROM]

There are various reasons to flash (Firmware on Ziox Quiq Sleek 4G).

For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.  If you’re going to hard reset your phone and cannot access the recovery menu. But most of the problems and benefits that cause flashing stock ROM are below.

The Benefit Of Firmware:

• Flash Stock ROM to unbrick your Ziox Quiq Sleek 4G
• Update and downgrade
• Unroot or fix bugs on the phone
• To solve the lag or stutter
• Fix software issues.
• Revert to stock to get your warranty
• Keeps rebooting issue
• If your phone boots straight into recovery
• Phone boots straight into its bootloader

Requirements To Flash Ziox Quiq Sleek 4G Stock ROM:

• Charge your mobile: Your phone may no less than a half charge.
• Laptop or PC: To execute this installation, you must use a PC or Laptop.

1. Take Ziox Quiq Sleek 4G Full Backup

Before going to install Ziox Quiq Sleek 4G stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

2. Download Ziox Quiq Sleek 4G Flash Tool And Drivers:

A.  Download and install Ziox Quiq Sleek 4G Drivers. The necessary communication between your device and PC.

These drivers are mainly for the devices powered by SPD chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the Spreadtrum flash tool for as Ziox Quiq Sleek 4G Flash Tool because of this tool is very efficient and support all kind of SPD phones.

Instructions to Flash Ziox Quiq Sleek 4G Stock ROM:

1: Download and install SPreadtrum USB Driver on your computer.

2: Download Ziox Quiq Sleek 4G stock ROM (PAC) file.

3: Extract Spreadtrum Upgrade Tool on your computer.

4: Now open Spreadtrum Upgrade Tool .exe.

5: Once SPreadtrum Upgrade Tool is Launched, Connect your device to the computer (Make sure your device is switched off).

6: Once your Smartphone is connected successfully to the computer, click on the Load Packed Button and add the Ziox Quiq Sleek 4G ROM file. (having .pac extension)

7: Once you have successfully added the. Pac file in SPD Upgrade Tool, click on the Start Downloading button to begin the flashing process.

8: Wait for 2 – 10 minutes, as the device is in the flashing process.

9: During the flashing process, your device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in SPD Upgrade Tool.

10: Close the SPD Tool on your computer and disconnect your Android Smartphone from the computer.

Congratulations, You have successfully installed Ziox Quiq Sleek 4G Stock ROM using SPD Flash tool.

Disclaimer:

• Read and understand the Full Guide before flashing.”Ziox Quiq Sleek 4G Firmware”.
• Use these instructions at your own risk.
• Before flashing, Stock ROM on Ziox Quiq Sleek 4G must have a 70–80% charge.

Bin Packet load Error When Flashing “Ziox Quiq Sleek 4G Stock Firmware File”: If you ever got Bin Packet Error then simply download and try flashing the firmware with this version of SPD Upgrade Tool.

How to Write IMEI After Flashing Ziox Quiq Sleek 4G Stock Firmware File: After flashing the stock firmware on Spreadtrum Device, you may need to flash the IMEI also, for that use WriteIMEI on Spreadtrum Devices.

Ziox Quiq Sleek 4G Firmware Details:	Disadvantage
Gapps: Included	No Root
Device Supported: Ziox Quiq Sleek 4G	No Twrp And Nand Backup
Tool Supported: SPD Flash Tool	No Customization And Over cloaking
Soc: SPD	No ADB Ad Block
Os: Android 6.0	Pre-installed OEM apps

Get Link