Xiaomi Redmi 1 Firmware Flash File [MT6589]

Xiaomi Redmi 1 Firmware

How to flash Xiaomi Redmi 1 firmware file. That’s what we’re going to tell you in this post! To do it, we’ll use a free flashing tool called Sp Flash Tool. This tool will enable you to flash stock ROM of your Xiaomi Redmi 1 and set up on a new Firmware.

We use the Sp flash tool for this procedure there are different reasons why we will use Sp Flash Tool to unbrick the Xiaomi Redmi 1. I believe this tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Xiaomi Redmi 1.

The Advantages Of Xiaomi Redmi 1 Stock ROM:

A Soft Brick or a Software Brick, is usually just when you’re Xiaomi Redmi 1 is stuck in a boot loop, and as the name implies, is caused by a software error on Xiaomi Redmi 1, usually the lack of a system to boot from or some other minor software bug that glitching boot. They are easily fixable by flashing the stock ROM on Xiaomi Redmi 1 through recovery or with SP Flash Tool. If your Xiaomi Redmi 1 device turns to a soft-brick, it may:

  • Keeps Rebooting;
  • Boots Straight Into Recovery;
  • Boots Straight Into its Bootloader;
  • Freeze at the startup screen or boot Animation;

Xiaomi Redmi 1 Stock ROM Details:

Gapps FileIncluded
Device SupportedXiaomi Redmi 1
Tool SupportedSP Flash Tool
ProcessorMediaTek MT6589
OsAndroid 4.4


Pre-requirements to Install Xiaomi Redmi 1 Firmware:

  • Supported Phone: Xiaomi Redmi 1
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Xiaomi Redmi 1 Backup:

Download Xiaomi Redmi 1 Flashing Tool And Drivers:


  • Please read and understand the Full Guide Before Flashing Xiaomi Redmi 1 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • In addition, Make sure that the USB drivers for your device are installed on the computer.
  • Before flashing, Stock ROM Xiaomi Redmi 1 must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Xiaomi Redmi 1 Firmware:

1. Download Xiaomi Redmi 1 Firmware zip file given above and extract it on your computer.

2. Download Xiaomi Redmi 1 USB driver and set up it on your computer. In case if in case you have already put in a USB driver in your computer skip this step.

3. Next, switch off your Xiaomi Redmi 1 smartphone and take away the battery (it’s removable).

4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover the “Flash_tool.exe” file in it. Launch it.

5. As soon as the SP Flash tool is launched, click on on “Download” tab.

6. Now, click on on “Scatter-loading” button within the download tab.

7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference see the picture given under.

8. Now click on on the “Download” button to start out the flashing process.

9. Next, join your Xiaomi Redmi 1 Android device to your computer by means of the unique USB cable (without battery – whether it is battery removable) and press volume up or volume down button.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two. As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.

11. Now, shut the SP Flash tool in your computer and unplug your smartphone.

That’s it. Now you’ve successfully flashed Xiaomi Redmi 1 stock ROM on your Android device. If you happen to encounter any points whereas following this tutorial, do let me know by way of feedback.

Follow Detailed Instruction Xiaomi Redmi 1 Firmware Flashing With Sp Flash Tool. To install Twrp On Xiaomi Redmi 1 Go here.

Check Also

itel L6503 Firmware

Itel V41 Firmware Flash File [Stock ROM Download]

The specific Itel V41 Firmware comes with a Stock ROM of Itel V41. This helps …

Leave a Reply

Your email address will not be published. Required fields are marked *