Winstar WS113 Android 4.4.2 Official Stock Firmware Pac Flash Files.
We will use SPD Download Tool to unbrick the Spreadtrum Devices With Stock ROM Flash Files. This tool is really very efficient. Just Follow the step by step procedure to use One Click Unbrick Tool and unbrick your SPD Phone.
SPD Download Tool and it is used to Manually Upgrade or flash Spreadtrum Android Smartphone or Tablet. SPD Download Tool is used to flash only Stock Rom or Custom OR Stock Firmware on Spreadtrum Devices. Flash File comes in .zip Format. To use Spd Factory Update tool Flash Stock ROM first need to properly install the latest Spreadtrum Drivers.
The Benefit Of Stock ROM:
You Can Use The Following Flash Files For Upgrade or Unbrick Spreadtrum Devices. / And If You Want To Hard Reset It By Flashing The Stock ROM/ In Case If You Are Using Any Custom Rom And Want Back To Stock Rom And Official Firmware Or Facing The Boot Loop Problem. This Method Is Also Useful For Sudden Death/Bricked/Not Power And Also After Flashing The Stock Firmware IMEI Null or Unknown Baseband Problems Can Be Solved.
- Please Read and understand the Full Guide Before Flashing Stock Rom.
- Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
- Make sure that the USB drivers for your device are installed on the computer.
- Your smartphone must have a 70–80% charge.
- Make a backup copy of important data such as Backup your Call Log – Contacts – Sms – Etc With G Backup, it is to if something goes wrong, your data is not affected.
Bin Packet load Error: If you ever got Bin Packet Error then simply download and try flashing the firmware with this version of SPD Upgrade Tool.
How to Write IMEI: After flashing the stock firmware on Spreadtrum Device, you may need to flash the IMEI also, for that use WriteIMEI on Spreadtrum Devices.
How To Flash Winstar WS113 With Spreadtrum Upgrade Tool:
Step 1. Install Spreadtrum Drivers.
Step 2. Install SPD Download Tool.
Step 3. Open the Research download tool > bin folder.
Step 4. Launch ResearchDownload.exe.
Step 5. Click on the Load Packet icon (top left corner).
Step 6. In the window that pops up, navigate to the location of the .pac file, select it then click Open.
Step 7. The PAC file should now be loaded (its name should appear at the top).
Step 8. Click the Settings Icon (top left corner).
Step 9. In the box that pops up, untick any item(s) you do not wish to flash then click OK. Ignore this step if you wish to flash all files.
Step 8. Click the Start downloading button.
Step 9. You should see Waiting…. under the Progress bar.
Step 10. Switch off the phone (still with battery inside) then connect it to the PC via USB cord (note that you might need to hold the volume decrease button while connecting to PC on some phones) and flashing should begin. DO NOT interrupt.
Step 11. Once flashing is complete, you’ll see Passed.
Step 12. Click on the Stop downloading icon then disconnect the phone from PC and boot.
Follow Detailed Instruction Flashing With Spreadtrum Upgrade.