Winmax Tiger X2 Firmware Flash File [Lollipop ROM]

Are you in search of the Winmax Tiger X2 firmware of your device Winmax Tiger X2? If sure your reply, you might be on the suitable web page. We’ve given the direct link to download Winmax Tiger X2 firmware.

Winmax Tiger X2 Firmware Flash File [Lollipop ROM]

The Winmax Tiger X2 is Run on Android 5.1 Lollipop OS Powered by MediaTek MT6580 Processor, it is a Dual SIM (GSM and GSM) Smartphone/Tablet, Connectivity options include Wi-Fi, GPS, Bluetooth, Infrared, 3G and 4G. Sensors on the phone include the Proximity sensor, Accelerometer, and Ambient light sensor.

If your Winmax Tiger X2 device is corrupt or bricked. Download Winmax Tiger X2 firmware from here. (based on your device model number) and flash it on your smartphone or tablet. To get it back to a working condition again. In this post, we share Winmax Tiger X2 official Flash file we test this ROM on many phones it,s work well. To download the official firmware of Winmax Tiger X2 and flash with any chines Mobiles flashing tool or box.

We will use Sp Flash Tool to unbrick the Winmax Tiger X2 as we use for winmax tiger x6. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Winmax Tiger X2.

SP flash tool which is also known as the Smart Phone Flash Tool is a cross-platform application. We use the SP flash tool for Flash custom recovery, flash Stock Rom and to fix the hard brick device. This is a very simple tool SP flash tool is use on Mediatek devices. This allows you to flash stock firmware on Mediatek smartphones and Tablets only. It will not support the devices having chipsets other than MediaTek.

The Benefit Of Winmax Tiger X2 Firmware:

  • Flash Stock To Unbrick your Winmax Tiger X2
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade Winmax Tiger X2
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on Winmax Tiger X2
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Winmax Tiger X2 Firmware Details:

  • Gapps File: Included
  • Device Supported: Winmax Tiger X2
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek MT6580
  • Os: Android 5.1 Lollipop
Download
Winmax_Tiger_X2_MT6580_1.6_06072016_5.1.zip

Pre-requirements to Install Winmax Tiger X2 Firmware:

  • Supported Phone: Winmax Tiger X2
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Phone Backup:

Flashing Tool And Drivers:

Disclaimer:

  • Please Read and understand the Full Guide Before Flashing Winmax Tiger X2 Stock ROM.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Winmax Tiger X2 Firmware:

Step 1: Extract And Run SP flash tool.

Step 2: Install MTK  android USB drivers.

Step 3: Then download Winmax Tiger X2 Firmware.

Step 4: Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.

Step 5: Now open SP flash tool.exe.

Step 6: When SP flash tool open, go to download button in SP flash tool.

Step 7: In the download tab, click on the scatter load button.

Step 8: After locating the scatter tab, click on the download button.

Step 9: Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)

Step 10: When flashing is completed, a green ring will appear in SP flash tool.

Step 11: Close SP flash tool on your computer and unplug the phone.

Step 12: Power on the phone and enjoy.

Step 13: After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

Winmax Tiger X2 Firmware

Follow Detailed Instruction Winmax Tiger X2 Firmware Flashing With Sp Flash Tool.

Leave A Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More

Do NOT follow this link or you will be banned from the site!
Please disabled adblocker to keep our website live.After Disabled Click Refresh button
  1. Click on the "ABP" icon in the top-right of your browser
  2. Click on "Enabled on this site" to disable for aiomobilestuff.com

Close