Wiko Tommy 2 Firmware Flash File [Stock ROM Download]

ByBani

Wiko Tommy 2 Firmware

Welcome To all in one thread for Wiko Tommy 2 in this post I will share all kinds of Wiko Tommy 2 Firmware With you. Like Ota software update fastboot ROM And QFIL flash tool. So keep in touch and stay updated with your Wiko Tommy 2 software upgrade.

Download Firmware/Flash File For Wiko Tommy 2:

“Wiko Tommy 2 Firmware” is the software that is provided by the vendor, or You may say that the software. Which was installed by the manufacturer of the phone is Wiko Tommy 2 Stock Rom.

The other type of the Rom is Custom Rom which advance users installed after flashing it as per they desire. Flashing a stock Firmware means installing the system image into the device’s internal flash memory.

Advertisements

The Benefit Of Wiko Tommy 2 Stock Firmware:

  • Fix the boot loop problem
  • Upgrade and Downgrade
  • Unroot or Fix Bugs on your phone
  • Fix the lag or stutter on
  • Revert to stock to gain your warranty
  • Will able to receive OTA Updates

Pre-requirements:

  • Supported Phone: Wiko Tommy 2
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.
  • Take Wiko Tommy 2 Full Backup

Before going to install Wiko Tommy 2 stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

  • Download Wiko Tommy 2 Flash Tool And Drivers:
  • A.  Download and install Wiko Tommy 2 Drivers. The necessary communication between your device and PC.
  • These drivers are mainly for the devices powered by Qualcomm chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.
  • B. We use the QFIL QPST Flash Tool for as Wiko Tommy 2 Flash Tool because of this tool is very efficient and support all kind of Qualcomm phones.

Instructions to Flash Wiko Tommy 2 Stock ROM:

1. Download and install the driver and tool above. Then launch the QFIL tool.

Advertisements

2. Turn off the phone (Remove the battery if possible, then insert the battery again), hold up the VOLUME KEY, and plug in the USB cable to connect to the computer.

3. On the QFIL tool, select the files, in turn, select the files in the WW_ZS670KS_29.12.18.12_MR0.1_20200831_release-user.raw ROM folder.

4. After clicking Download, wait for the flash process to finish, the time is about 5-10.

5: During the flashing process, your device will restart automatically.

Advertisements

6. Once flashing is completed, Close the Qfil Tool on your computer and disconnect your Android Smartphone from the computer.

  • Congratulations, You have successfully installed Stock ROM using the QFIL Flash tool.

Follow Detailed Instruction Firmware Flashing With Qfil Flash Tool.

Disclaimer:

  • Read and understand the Full Guide before flashing.”Wiko Tommy 2 Firmware”.
  • Use these instructions at your own risk.
  • Before flashing, Stock ROM must have a 70–80% charge.

Wiko Tommy 2 Firmware Details:

Disadvantage
Gapps: Included No Root
Device Supported: Wiko Tommy 2 No Twrp And Nand Backup
Tool Supported: QPST Tool – QFIL No Customization And Over cloaking
Soc: QCOM No ADB Ad Block
Os: Android 10 Pre-installed OEM apps

Download Firmware/Flash File

Similar Posts

One Comment

  1. Flashing Firmware says:

    Good thing there are people sharing this kind of guide cause lot of people have problem with their phone getting stuck.

Comments are closed.