Wiko Lenny 4 Plus Firmware Flash File [Stock ROM]

Wiko Lenny 4 Plus Firmware


This guide is about how to flash Wiko Lenny 4 Plus Firmware and download links. This will help you to revert from Wiko Lenny 4 custom ROM And un Root or Bypass The FRP Lock. you will also find out Wiko Lenny 4 Drivers.

This article contains the Wiko Lenny 4 Plus Firmware Flash File. That will allow you to recover your Wiko Lenny 4 Plus mobile into its initial Factory state.

Additionally, you can use the file to change your phone to the newest version. You’ll find these below files useful if you have used the flashed customized builds. Brick your device, change your device and also come back that device to the factory state.

The Advantages Wiko Lenny 4 Plus Firmware:

  • Flash Stock To Unbrick your Wiko Lenny 4 Plus
  • Flash Stock ROM to revert from Wiko Lenny 4 Plus Custom ROM build
  • Un Root Wiko Lenny 4 Plus
  • Unroot or Fix Bugs on the phone
  • To remove the FRP lock from Wiko Lenny 4 Plus
  • By flashing Stock ROM, you can fix software issues.
  • Revert to stock to get your warranty.

Wiko Lenny 4 Plus Firmware Details:

  • Gapps File: Included
  • Device Supported: Wiko Lenny 4 Plus
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek MT6580
  • Os: Android

Download Wiko Lenny 4 flash file

Pre-requirements to Install Wiko Lenny 4 Plus Stock ROM:

  • Supported Phone: Wiko Lenny 4 Plus
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Phone Backup:

Wiko Lenny 4 Plus Flashing Tool And Drivers:


  • Please read and understand the Full Guide Before Flashing Wiko Lenny 4 Plus Stock ROM.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Wiko Lenny 4 Plus Stock ROM:

Step 1: Extract And Run SP flash tool.

Step 2: Install Wiko Lenny 4 Plus USB drivers.

Step 3: Then download Wiko Lenny 4 Plus Firmware.

Step 4: Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.

Step 5: Now open SP flash tool.exe.

Step 6: When the SP flash tool opens, go to the download button in the SP flash tool.

Step 7: In the download tab, click on the scatter load button.

Step 8: After locating the scatter tab, click on the download button.

Step 9: Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)

Step 10: When flashing is completed, a green ring will appear in the SP flash tool.

Step 11: Close the SP flash tool on your computer and unplug the phone.

Step 12: Power on the phone and enjoy it.

Step 13: After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

Follow Detailed Instruction Wiko Lenny 4 Plus Firmware Flashing With Sp Flash Tool.