Wiko Jerry 3 Firmware Oreo [How To Flash Stock ROM File]

Today I am going to share with you. The Wiko Jerry 3 Firmware Oreo update. This will also help you to bypass FRP lock from Wiko Jerry 3.

Wiko Jerry 3 is base on MTK CPU. To install the Stock ROM on Wiko Jerry 3 MediaTek powered device. you need Flashing Tool known as Sp Flash Tool. also called SmartPhone Flashing Tool.

Download the Wiko Jerry 3 Stock Firmware. drivers, and SP flash tool, then you can carry out our instructions on setting up the firmware on Wiko Jerry 3.

Download Official Stock Firmware Flash File For Wiko Jerry 3. If you have Wiko Jerry 3 Smartphone. and You want to download the Stock ROM – Flash File. For it. then you are in the right place. You have to do this by using the Below Tutorial.

The Benefit Of Wiko Jerry 3 Stock ROM:

Wiko Jerry 3 Stock Firmware is created by the official company. and allows you to Fix Wiko Jerry 3 software errors. Updates errors, Remove viruses, Solve restart problem.

Solve Wiko Jerry 3 Hanging and dead issue, Delete pattern lock. Go Back to Stock, Restore Wiko Jerry 3 to factory state, Unroot Wiko Jerry 3. Remove custom recovery, and Solve blank screen problems.

Wiko Jerry 3 Stock ROM Details:

• Gapps File: Included
• Device Supported: Wiko Jerry 3
• Tool Supported: SP Flash Tool
• Processor: MediaTek – MT6580
• Os: Android 8.1.0 Oreo

Download File	Description
Download	Wiko Jerry 3 MT6580 8.0 Flash Files.zip Wiko_Jerry_3_v18 Wiko Jerry 3_MT6580M_8.1_Factory.zip Wiko_Jerry_V10_MT6580.zip Wiko_Jerry_V32_MT6580.zip Wiko_Jerry_V2806_MRA58K_SPD_6.0.zip (spd) JERRY3_V18.zip

Pre-requirements to Install Stock Firmware on Wiko Jerry 3 k300:

• Supported Phone: Wiko Jerry 3
• Charge your mobile: You may no less than a half charge.
• Laptop or PC.

Take Phone Backup:

• Backup your Call Log – Contacts – Sms – Etc With G Backup
• Backup your current Firmware With MTK Droid Tool
• Backup your backup IMEI NVRAM

Wiko Jerry 3 Flash Tool And Drivers:

We will use Sp Flash Tool to unbrick the Wiko Jerry 3. This tool is very efficient. Follow the step by step procedure to use One-Click Unbrick Tool. and unbrick your Wiko Jerry 3 by installing Stock Firmware.

Advanced mobile phone Flash Tool or SP Flash Tool. is a Windows application. which causes you to introduce CWM recuperation or TWRP recuperation. or custom ROM firmware, or stock ROM firmware in your cell phone or tablet.

• Wiko Jerry 3 Flash Tool: Download the latest SP Flash tool and extract it (Install)
• Wiko Jerry 3 driver: Get VCOM Driver and set up on your pc (still works with MT67xx phones)

Disclaimer:

• Please read and understand the Full Guide Before Flashing Wiko Jerry 3 k300 Firmware.
• Use these instructions at your own risk. We will not be responsible for everything that happens to you. or your device resulting from the use of information in this guide.
• Make sure that the USB drivers for your device are installed on the computer.
• Your smartphone must have a 70–80% charge.
• Make a backup copy of important data. such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own!

Advertisements

Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM

Instructions to Install Wiko Jerry 3 k300 Firmware:

1. Download Wiko Jerry 3 stock ROM zip file given above and extract it in your computer.

2. Download Wiko Jerry 3 USB driver and set up it on your computer. In case if in case you have already put in USB driver in your computer skip this step.

3. Next, switch off your Wiko Jerry 3 smartphone and take away the battery (it’s removable).

4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover “Flash_tool.exe” file in it. Launch it.

5. As soon as SP Flash tool is launched, click on on “Download” tab.

6. Now, click on on “Scatter-loading” button within the download tab.

7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference see the picture given under.

8. Now click on on the “Download” button to start out the flashing process.

9. Next, join your Wiko Jerry 3 Android device to your computer by means of the unique USB cable (without battery – whether it is battery removable) and press volume up or volume down button.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two.

As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.

11. Now, shut SP Flash tool in your computer and unplug your smartphone.

That’s it. Now you’ve successfully flashed stock ROM firmware in your Wiko Jerry 3 Android device.

Follow Detailed Instruction Wiko Jerry 3 Firmware Flashing With Sp Flash Tool.